Raptor Chapter

Just found this ancient gem, wonder if they still have the project on the back burner, would like to know it's intended seat height! http://www.motorcycledaily.com/wp-content/uploads/2009/02/022009top.jpg See http://www.motorcycledaily.com/2009/02/20february09_cagiva_elefant/ Thats looks so sexy

Hi ! I think I'm going to change my handlebars again and with new setup I need new mirrors... And its hard to imagine how bike looks with different mirrors, can you guys post pics of your someone else bike with different looking mirrors ? I've been watching LSL barends and some rizoma stuff, but it...

Algernon wrote:55 years agoNow sadly for sale in classifieds section.

Did you end up getting the issues sorted?

What type of pads you got fitted? They are not all the same................. I would de-glaze pads and discs to see if that helps? I'm running metal gear sintered pads. I've run them in the past and they offer good power but can be wooden feeling. I did the bold zip tie trick again and that's taken...

so whats the problem with the front brake? Is it spongy when pulled? Fading when braking hard? Too much initial bite or not enough? When you put fresh fluid in did you make sure you got all air out of the system? If the pistons are moving freely then its either the pressure (see above) or your pads...

crash bungs available on ebay. Mini service before you go, check all fluid levels, lube whatever needs doing and adjust chain, check wheel alignment, makes sure brakes are spot on and plenty of pad left. Check all torque settings of important fastenings! Inspect tyres and make sure pressures are co...

crash bungs available on ebay. Mini service before you go, check all fluid levels, lube whatever needs doing and adjust chain, check wheel alignment, makes sure brakes are spot on and plenty of pad left. Check all torque settings of important fastenings! Inspect tyres and make sure pressures are co...

Guys I'm going to do a track day on the mighty raptor, any advice from people who have done it?

Also, does anyone know where to get crash bungs for the raptor?

Alright looks like I fixed it. Turns out the fuel line from the fuel pump was loose and spraying the fuel everywhere. I tightened and checked everything while I was there.

Hooked it all back up and looks like I got out of it all for a tank of fuel

So i was riding home last night and my bike started running like a heap of shite. I quickly realised what it was when I felt fuel spraying on my leg and the back wheel started sliding all over the joint. Had a look at the fuel is just spraying out of the left side of the fuel pump at the bottom, rea...

Looks good mate, I've got a black one too, it's the only color to have!

Thanks for the replies guys, I'll definitely try that wire! Next one to find is the temperature wire. I'm based in Samford, Queensland. I basically live at the bottom of mount glorious so it's a great location for riding! Pics to come after I've done some more cleaning up and installed some bar ends!

The raptor will pull it now worries for sure. I thought the stock gearing was quote good but I went a 15 on the front because I like wheelstands

I'm not sure if they do, but if not you're lock exhaust shop should be able to make some pretty easily

17 tooth, you're crazy!