Search found 258 matches

by RaptorMan
Thu Jul 28, 2016 4:32 pm
Forum: Technical expert hints
Topic: Clutch conversion revisited!
Replies: 10
Views: 2548

Re: Clutch conversion revisited!

Nice job Boof. I am looking into doing mine as new clutch cables are expensive. You say you had to "cut" the pushrod (DL1000 V-Strom left hand push-rod - SUZUKI PRODUCT NUMBER: 2311126D00. I had to cut this item shorter to 114mm, any longer and the clutch will slip.) yet your friend says tl parts fi...
by RaptorMan
Mon Oct 12, 2015 11:34 pm
Forum: General Technical
Topic: Clutch conversion
Replies: 4
Views: 402

Re: Clutch conversion

SV1000 clutch bits fit Miz
by RaptorMan
Tue Apr 22, 2014 7:17 pm
Forum: General Technical
Topic: Standard Silencers
Replies: 1
Views: 156

Standard Silencers

Long shot I know but does anyone have a spare band off a standard silencer ?
Its the one at the rear of the can that goes over the end of the carbon cover.
Cheers 8)
by RaptorMan
Sun Nov 10, 2013 7:18 pm
Forum: General Technical
Topic: Bellypan
Replies: 11
Views: 694

Re: Bellypan

TL ones don`t fit without modification.
Downpipes are in a slightly different position and the rear brackets are too short so bellypan fouls exhausts.
by RaptorMan
Sun Nov 10, 2013 7:12 pm
Forum: General Technical
Topic: Meta Alarm problem
Replies: 2
Views: 115

Meta Alarm problem

HELP......................... My Meta M357T alarm immobiliser has just decided to go off while the bike is parked in the garage :blink: . Didn`t set the alarm just let it immobilise itself. Wouldn`t switch off with remote,had to disconnect the battery. Also with the alarm sounding and the indicators...
by RaptorMan
Mon Jun 10, 2013 7:28 pm
Forum: V-Raptor and Xtra
Topic: Leaky rad
Replies: 12
Views: 673

Re: Leaky rad

Is it really Miz ?
Would you believe it.
What are the chances of me finding out about your cousins company before you tell me.
:D
by RaptorMan
Mon Jun 10, 2013 6:01 pm
Forum: V-Raptor and Xtra
Topic: Leaky rad
Replies: 12
Views: 673

Re: Leaky rad

Cheers CT. I think that's where I`m gonna send mine. 8)
From the (limited) research I have had time to do they seem to keep coming back up to the top of the list.
:happyhappy:
by RaptorMan
Sun Jun 09, 2013 8:29 pm
Forum: V-Raptor and Xtra
Topic: Leaky rad
Replies: 12
Views: 673

Re: Leaky rad

I have to say the quality of users on this site is amazing. :D
Thank you very much for your kind offer Crap Tartan but I have just found someone on the island willing to do exactly the same thing.
Hopefully mine can be repaired while I`m away so I can give the borrowed one back.
Cheers everyone.
8)
by RaptorMan
Sun Jun 09, 2013 2:56 pm
Forum: V-Raptor and Xtra
Topic: Leaky rad
Replies: 12
Views: 673

Leaky rad

Currently not a happy bunny :(
Supposed to be going to the Nurburgring next Friday(14th) and my rad has just sprang a leak :x
Need one asap or somewhere that can repair it.
HELP please everyone.
by RaptorMan
Tue Jul 31, 2012 6:33 pm
Forum: General Technical
Topic: TLS ECU to work on Raptors.
Replies: 1
Views: 360

TLS ECU to work on Raptors.

I know this topic has been covered before but after mucho research here is the definitive way to do it. :) First (obviously) :mrgreen: you will need to get hold of a `97 TL1000S ECU. Then you will need a 100 ohm resistor,some(at least one)ECU plug pins(female), and a couple of short lengths of wire ...
by RaptorMan
Sat Jul 28, 2012 4:16 pm
Forum: General Technical
Topic: tl1000s ecu on raptor will work with 1 wire mod :-)
Replies: 39
Views: 6065

Re: tl1000s ecu on raptor will work with 1 wire mod :-)

I have just been looking at a wiring diagram for the tls ecu and it lists the A/T pin as No.39 ? Which makes it 4th in from the right,bottom row,right hand(large connector) as you look at the connectors with the connector clips at the top. According to the suzuki FI system diagram pin 40 is part of ...
by RaptorMan
Wed Jul 25, 2012 8:36 pm
Forum: General Technical
Topic: tl1000s ecu on raptor will work with 1 wire mod :-)
Replies: 39
Views: 6065

Re: tl1000s ecu on raptor will work with 1 wire mod :-)

OK,I now have a TLS ecu.
You say fit the resistor onto pin 40(bottom row).
Do you count from left to right in both sockets or one socket at a time?
Cheers,
John.
by RaptorMan
Thu Jul 19, 2012 6:38 pm
Forum: General Technical
Topic: Will SV1000S engine fit a Rap
Replies: 3
Views: 836

Re: Will SV1000S engine fit a Rap

Externally they are basically the same,majority of the differences are in the mounting plates.
by RaptorMan
Thu Jul 19, 2012 6:35 pm
Forum: General Technical
Topic: Would this fit the raptor? HYMEC CLUTCH CONVERSION
Replies: 3
Views: 645

Re: Would this fit the raptor? HYMEC CLUTCH CONVERSION

SV 1000 system bolts straight on.Just need to change the front sprocket cover for an SV one too. 8)
by RaptorMan
Thu Jul 19, 2012 6:17 pm
Forum: V-Raptor and Xtra
Topic: horse power
Replies: 10
Views: 1650

Re: horse power

Weirdo,apparently the ecu is a straight plug and play except for one wire which has to be connected separately.

Snap,the Raptor ecu can only be modified with a plug in box whereas the tls ecu is already programmed for more power to start with and can be re-programmed.