Clutch actuator service

Chat about anything
Post Reply
User avatar
redgpzrider
On the Road
Posts: 15
Joined: 9 years ago
Location: Stroud, Gloucestershire

Clutch actuator service

Post by redgpzrider »

Thank you to whomever it was who gave me the heads up on the stiff clutch issue. :thumbsup:

Took the actuator off and cleaned and greased the helixes and removed the Built-up crud on the actuator rod. :suspect:

Action much smoother now but still on the heavy side but I'll get used to that.

Regards Red.
It is better to remain silent and be thought a fool than to open your mouth and remove all doubt.
User avatar
Miz
On the Road
Posts: 818
Joined: 19 years ago
Location: Derby

Re: Clutch actuator service

Post by Miz »

If it's still heavy, clean and grease the lever pivot, and check that your cable is free and routed correctly.
152/999
Image
Image
User avatar
redgpzrider
On the Road
Posts: 15
Joined: 9 years ago
Location: Stroud, Gloucestershire

Re: Clutch actuator service

Post by redgpzrider »

Something I did notice whilst doing this job is that oil came out of the seal when I pulled the clutch rod out to clean it, I take it that this is normal? :doh:
It is better to remain silent and be thought a fool than to open your mouth and remove all doubt.
Post Reply