Newbie

Make your first post here, say "Hi" and buy a virtual round

Moderators: snapdragon, shebee, Moderators

Post Reply
seanax
On the Road
Posts: 7
Joined: Tue Jun 07, 2016 12:52 pm

Newbie

Post by seanax » Tue Jun 14, 2016 9:23 pm

Hi all im sean (nw uk) ive had my rap about a month ex bike were an rsv also have an ironhead harley. The bike is completely standard but ive just put a jack up kit as its a bit low, and also blanked off the return exhaust emission thing. Hope to chat to you all soon.

geoff
Knight of the realm
Posts: 109
Joined: Wed Apr 27, 2016 7:14 am
Location: Essex
Contact:

Re: Newbie

Post by geoff » Tue Jun 14, 2016 10:11 pm

Welcome to you from another relatively new member, was it an easy job blanking off the emissions gubbins? :)

User avatar
shebee
Site Admin
Posts: 2299
Joined: Sun Oct 13, 2002 8:56 pm
Facebook address thingy: facebook.com/shebee.duff

Re: Newbie

Post by shebee » Wed Jun 15, 2016 4:34 am

Welcome to the asylum :D
Twisted Tequila Sister

seanax
On the Road
Posts: 7
Joined: Tue Jun 07, 2016 12:52 pm

Re: Newbie

Post by seanax » Wed Jun 15, 2016 6:05 am

Hi geoff blanking plates i got off ebay (greasemonkeygarage2014) there 10 pound. Could make them yourself if you have the know how. Its only 2 bolts for each then just remove hose and blank off. The only problem i had were on front cylinder as its exposed to the eliments one nut snapped :doh: so i had to drill out the stud, sum how managed to drill perfect and the thread were fine just cleaned up with a tap. Rear cylinder is just a bit fiddley just have get ratchet in on right angle and your fine. Another mod i did intermoto radiator fan switch (red 95-100 degree) m18x 1.5 thread. Only fitted this as temperature were 107 degree other day and i have never seen anything that high before so now fan kicks in earlier and doesn't go over 100 degree.
Last edited by seanax on Wed Jun 15, 2016 7:48 am, edited 1 time in total.

geoff
Knight of the realm
Posts: 109
Joined: Wed Apr 27, 2016 7:14 am
Location: Essex
Contact:

Re: Newbie

Post by geoff » Wed Jun 15, 2016 7:19 am

Thanks Sean, I shall look him up on ebay. :)

Post Reply