Jack up plates

Technical stuff specific to the Raptor 1000
Post Reply
1Wardy
On the Road
Posts: 12
Joined: 2 years ago

Jack up plates

Post by 1Wardy »

Just fitted jack up plates, it's raised it 37mm.
If anyone's interested 😁
Attachments
20230909_095422.jpg
1Wardy
On the Road
Posts: 12
Joined: 2 years ago

Jack up plates

Post by 1Wardy »

20230909_095411.jpg
1Wardy
On the Road
Posts: 12
Joined: 2 years ago

Jack up plates

Post by 1Wardy »

20230909_095401.jpg
nickst4
On the Road
Posts: 679
Joined: 8 years ago
Location: Norfolk
Has thanked: 4 times
Been thanked: 23 times

Jack up plates

Post by nickst4 »

Interesting. Where did the plates come from?

With that degree of raise, which is actually dropping of the swingarm and wheel relative to the chassis, it looks as though the chain will rub pretty hard on the swingarm protector (if you still have one!) and the chain tension will vary a great deal, possibly risking the gearbox bearings if it runs too tight. Better check those out!

Nick
Post Reply