Brake Pads

Technical stuff specific to the V and Xtra raptors
Post Reply
taz_116
On the Road
Posts: 228
Joined: 17 years ago
Location: Birmingham

Brake Pads

Post by taz_116 »

Just wondering if anyone on here is using Carbon Ceramic Pads on thier V-Rap. Is there any noticable improvement over standard Brembo pads?

i need to change all the pads on the bike so was thinking of treating it to them, but only if there is a major difference in breaking.

Si
Burn Rubber, Not Your Soul

2001 V-Raptor 1000, K&N Air Filter & TRE
User avatar
Hairy_Mark
Hirsute Maximus Spanner...I do Technical Me ;)
Posts: 160
Joined: 12 years ago
Location: Cumbria

Re: Brake Pads

Post by Hairy_Mark »

If you're talking about the standard pads (Brembo Frendo 222) using teflon pads
would be an improvement. I swapped mine to EBC HH pads and got a good
improvement, both in power and feel. The EBC part code for fronts is FA244HH. I don't know
the code for the rears because I didn't change them. hope that helps.

P.S. the pads were tested by a car driver overtaking around the first bend, as I was bedding
them in. They pulled the bike up fine !
Legal disclaimer :
The author has recently been declared sane.
He thanks Dr Foster for this and hopes his
clothes dry out after the puddle incident.
User avatar
03raptorincalifornia
On the Road
Posts: 32
Joined: 9 years ago
Facebook address thingy: https://www.facebook.com/jack.

Re: Brake Pads

Post by 03raptorincalifornia »

Anyone have codes for the rear brakes? Been looking at replacing them, only to keep using the wrong ones (111 for Suzuki TL 2001 model [S maybe?]).
- Jack
California Owner of the Cagiva V-Raptor 1000
User avatar
Dante
On the Road
Posts: 236
Joined: 11 years ago
Location: Athens

Re: Brake Pads

Post by Dante »

At EBC codes are FA266 for rear.
Post Reply