power commander

Technical stuff specific to the V and Xtra raptors
Post Reply
1add2
On the Road
Posts: 41
Joined: 16 years ago
Location: poole

power commander

Post by 1add2 »

I have just fitted a pcII to my Vraptor. purchased from ebay model no E302-111 as far as i can tell it works fine
(just been out ride but not noticed any noticable difference), it running map M301-501 European Stage one map for TL1000S. Will work with stock or aftermarket exhaust. Also good with K&N filter
just let you guys know there are 3 of these left £125
http://www.ebay.co.uk/itm/190715714926? ... 1423.l2649
on the down side it is realy difficult squeezing the wiring in under the seat
ozzraptor
On the Road
Posts: 718
Joined: 10 years ago

Re: power commander

Post by ozzraptor »

1add2 wrote:55 years agoI have just fitted a pcII to my Vraptor. purchased from ebay model no E302-111 as far as i can tell it works fine
(just been out ride but not noticed any noticable difference), it running map M301-501 European Stage one map for TL1000S. Will work with stock or aftermarket exhaust. Also good with K&N filter
just let you guys know there are 3 of these left £125
http://www.ebay.co.uk/itm/190715714926? ... 1423.l2649
on the down side it is realy difficult squeezing the wiring in under the seat
Better off to stick to a cagiva map , you are only adding tls fuel adjustments to a cagiva map! You need the ecu , and its not a straight swap. Havent heard of any good results from doing the ecu swap. imho Cagiva map and dynotune :ride: I know ,an old thread but it got me thinking as i have played with a few tl maps and ended up sticking with a cagiva map. Must look into a dynotune if i can find one!
Post Reply