Page 1 of 2
Raptor 1000 parts
Posted: |November 21st, 2017|, 9:17 am
by dirtydog
Now the Raptor has gone to its new home its time to start clearing out the parts stash, I'll add to this thread as and when I find more stuff
Stainless steel Art race cans with link pipes, left link pipe has been adjusted so that it clears the chain, right can has a couple of marks on it where I knocked the bike over and they need a new clamp on each to hold the can to the link pipe
Grab rail, no idea what make it is.
I'll post pictures in a minute once I've resized them
No idea what they're worth so I'm open to offers
Re: Raptor 1000 parts
Posted: |November 21st, 2017|, 9:24 am
by dirtydog
- IMG_1971.JPG (249.06 KiB) Viewed 8656 times
- IMG_1970.JPG (171.74 KiB) Viewed 8656 times
Re: Raptor 1000 parts
Posted: |November 21st, 2017|, 9:27 am
by dirtydog
- IMG_1972.JPG (164.19 KiB) Viewed 8655 times
Re: Raptor 1000 parts
Posted: |November 23rd, 2017|, 5:59 am
by HiFi
PM Sent
Re: Raptor 1000 parts
Posted: |November 24th, 2017|, 8:01 am
by Dapper dan
Interested in the grab rail? How much would one have to pay for such a delightful object?
Re: Raptor 1000 parts
Posted: |May 14th, 2018|, 12:26 am
by dirtydog
Having a clear out now the Raptor has gone
Art race cans still for sale, the can straps are MIA but they can be bought on eBay for as little as £5 each, they'll also need new clamps
£120 delivered
Genuine bar ends, need painting £10 delivered
Complete rear light, no cracks £10 delivered
Rubber swingarm bolt cover thing £5 delivered
Reg/Rec £50 delivered
Rear suspension link triangles, originals. £10 delivered
Left hand side footpeg hangers/rearsets. I have 2 of these one has been broken and welded back together and the other I managed to break one of the tabs off that holds the pillion peg on when I was putting it back together after powder coating
Free just pay the postage cost
Swingarm and pivot bolt, some scratches/marks on it also has indentical marks on the underside on each side. Not sure what they're meant from as they were there when I bought it. £40 delivered
Will add some pics shortly once I've resized them
Re: Raptor 1000 parts
Posted: |May 14th, 2018|, 12:37 am
by dirtydog
- IMG_2098.JPG (184.8 KiB) Viewed 8018 times
- IMG_2097.JPG (152.25 KiB) Viewed 8018 times
Re: Raptor 1000 parts
Posted: |May 14th, 2018|, 12:38 am
by dirtydog
- IMG_2096.JPG (167.08 KiB) Viewed 8017 times
- IMG_2103.JPG (184.37 KiB) Viewed 8017 times
Re: Raptor 1000 parts
Posted: |May 14th, 2018|, 12:41 am
by dirtydog
- IMG_2106.JPG (131.1 KiB) Viewed 8017 times
- IMG_2105.JPG (199.57 KiB) Viewed 8017 times
- IMG_2104.JPG (174.64 KiB) Viewed 8017 times
Re: Raptor 1000 parts
Posted: |May 14th, 2018|, 12:42 am
by dirtydog
- IMG_2108.JPG (254.66 KiB) Viewed 8017 times
Re: Raptor 1000 parts
Posted: |May 17th, 2018|, 4:02 am
by stureid
Any pics of the cans? Interested...
Re: Raptor 1000 parts
Posted: |May 17th, 2018|, 4:50 pm
by dirtydog
Pics of the cans at the top of thread
Re: Raptor 1000 parts
Posted: |May 17th, 2018|, 7:44 pm
by stureid
Sorry, viewing on my phone and somehow missed that.
Re: Raptor 1000 parts
Posted: |May 20th, 2018|, 6:49 am
by dirtydog
Any takers before I stick it all on eBay?
Re: Raptor 1000 parts
Posted: |July 2nd, 2018|, 7:12 am
by dirtydog
Found some exhaust mount rubbers today
- IMG_2136.JPG (10.58 KiB) Viewed 7734 times
£10 delivered