rear brakelight not working .. 1000
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
rear brakelight not working .. 1000
after replying to kriss's post in 'Raptor 650' I've finally woke up and realised I best put this in the 1000 section for mine in case it's different
The brakelight itself works now I've fitted the new rear light, and changed a few spade fittings but but still no response from the rear lever
So liklihood that it's the master cyl switch/wiring? I can see a definite crimp/pinch in that wire so it's the current suspect
in the 650 post this is suggested http://www.moto-racing.co.uk/item--HEL- ... witch.html
Any clues as to which size fits? Numptie nilskills here, and eyes(and brain) are not good enough to measure pitch
The brakelight itself works now I've fitted the new rear light, and changed a few spade fittings but but still no response from the rear lever
So liklihood that it's the master cyl switch/wiring? I can see a definite crimp/pinch in that wire so it's the current suspect
in the 650 post this is suggested http://www.moto-racing.co.uk/item--HEL- ... witch.html
Any clues as to which size fits? Numptie nilskills here, and eyes(and brain) are not good enough to measure pitch
SnappY
~~X~X~{:>
~~X~X~{:>
-
- On the Road
- Posts: 170
- Joined: 14 years ago
- Location: East Riding of Yorkshire
Re: rear brakelight not working .. 1000
Im not sure on pitch - didn't occur to me to measure it
I ordered the one for the Brembo cylinder & they ask for the bike make and model to make sure - c'mon I mostly hope and pray it works
I ordered the one for the Brembo cylinder & they ask for the bike make and model to make sure - c'mon I mostly hope and pray it works
so many roads to travel - so many ways to get lost!
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
Re: rear brakelight not working .. 1000
me too CGcagiva_girl wrote:55 years ago-/
- c'mon I mostly hope and pray it works
SnappY
~~X~X~{:>
~~X~X~{:>
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
Re: rear brakelight not working .. 1000
aha
from another seller (more cost so I reckon i'll be going with your recommend CG)
from another seller (more cost so I reckon i'll be going with your recommend CG)
When using with Brembo master cylinders use '10 x 1.00mm Short' option.
-03 Copper crush washers are also required when fitting any 10 x 1mm or 10 x 1.25mm banjo bolts (x2 for single bolt, x3 for double bolt).
SnappY
~~X~X~{:>
~~X~X~{:>
Re: rear brakelight not working .. 1000
Pretty sure it's M10x1.0. It's a Brembo cylinder, and i believe (someone correct me if i'm wrong please) that 10x1.0 is the only pitch they use.
The only issue with fitting it to my number 3 donor bik.... erm.. i mean, Cagiva Girl's bike, was the connectors. A couple of minutes fitting the block from the original one isn't a problem though.
that's going to hurt ... isn't it.
The only issue with fitting it to my number 3 donor bik.... erm.. i mean, Cagiva Girl's bike, was the connectors. A couple of minutes fitting the block from the original one isn't a problem though.
that's going to hurt ... isn't it.
To a Raptor....EVERYTHING else is just prey !!
WOOHOO!...TWINS!
WOOHOO!...TWINS!
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
Re: rear brakelight not working .. 1000
weirdo wrote:55 years ago-/-
that's going to hurt ... isn't it.
or you could duck and run/hide
Thanks I've ordered and given them the bike info so hopefully they'll get it right
SnappY
~~X~X~{:>
~~X~X~{:>
-
- On the Road
- Posts: 170
- Joined: 14 years ago
- Location: East Riding of Yorkshire
Re: rear brakelight not working .. 1000
Let Weirdo think what he likes - ignorance is bliss as they say
He is only jealous cause I look after mine and hasn't got the 3000 rev glitch
He is only jealous cause I look after mine and hasn't got the 3000 rev glitch
so many roads to travel - so many ways to get lost!
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
Re: rear brakelight not working .. 1000
order STILL 'pending shipment' and they're not answering the phone - am getting nowsnapdragon wrote:55 years ago I've ordered and given them the bike info so hopefully they'll get it right
SnappY
~~X~X~{:>
~~X~X~{:>
- Crap Tartan
- On the Road
- Posts: 1545
- Joined: 16 years ago
- Location: Sitting in front of the screen in Portpatrick again
Re: rear brakelight not working .. 1000
nae luck Snap, should`ve took the easy option and binned the pressure switch for a little leccy push/pull one!
nil illigitimae carborundum
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
Re: rear brakelight not working .. 1000
You're right CT Shebee suggested the same thing but I'd gone and ordered the part already.Crap Tartan wrote:55 years agonae luck Snap, should`ve took the easy option and binned the pressure switch for a little leccy push/pull one!
I'm going to fettle the wiring with crimps as soon as the rain stops, but if it's the switch then I'll have to wait, or get a springsprung one.
SnappY
~~X~X~{:>
~~X~X~{:>
Re: rear brakelight not working .. 1000
I had to replace the rear brake switch last year, one of the wires had snapped just as it goes into the top of the banjo bolt. Managed to bodge it to get it through the MOT
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
Re: rear brakelight not working .. 1000
It's Finally arrived - can't recommend their service, promised that they'd sent it and they hadn't, so they lied
Disappointed, but the item is here now - and I'm away for the weekend and then Rappy goes in for big service and MoT on Tuesday so no time to fit it. I'll be taking it with us to Crescent Suzuki for the 'dealer' service (thought it was about time) so they can fit it for me (and probs charge loads) - ho hum
Disappointed, but the item is here now - and I'm away for the weekend and then Rappy goes in for big service and MoT on Tuesday so no time to fit it. I'll be taking it with us to Crescent Suzuki for the 'dealer' service (thought it was about time) so they can fit it for me (and probs charge loads) - ho hum
SnappY
~~X~X~{:>
~~X~X~{:>
Re: rear brakelight not working .. 1000
snapdragon,
what happened, did you manage to install it?
Do you have response from the rear lever?
what happened, did you manage to install it?
Do you have response from the rear lever?
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
Re: rear brakelight not working .. 1000
Sorry to leave this 'hanging' AloudAloud wrote:55 years agosnapdragon,
what happened, did you manage to install it?
Do you have response from the rear lever?
- the Raptor went for a major service and MoT test (general road fitness) the workshop folks decided she needed a new master cylinder on the rear brake due to insufficient braking so they fitted one and took a very long time because they couldn't at first find one to fit, so I didn't need to fit it (not even sure where I put it now)
the rear brake light now works, now it's the indicators turn to go on strike
SnappY
~~X~X~{:>
~~X~X~{:>