Hey
Today my clutch cable broke and I was wondering if
the hydraulic clutch slave cylinder (on gearbox) will fit
from suzuki GSXR 1000 K7 K8 etc?
For example:
http://allegro.pl/suzuki-gsxr-1000-k7-k ... 23013.html
Thanks!
Clutch slave cylinder on gearbox from GSXR
Re: Clutch slave cylinder on gearbox from GSXR
It looks very similar, but looks can be deceiving!
I think you have to make some changes to the push-rods when you swap to hydraulic.
I think you have to make some changes to the push-rods when you swap to hydraulic.
Re: Clutch slave cylinder on gearbox from GSXR
Yes the push-rod needs to be a little bit longer.
I was wondering if this one fits:
http://allegro.pl/show_item.php?item=2624703313
People says that from RF900 will fit too but nor from TLR or RF900
slave cylinder is not available in my area.
The pump I'm going to use is from ZXR 750.
I was wondering if this one fits:
http://allegro.pl/show_item.php?item=2624703313
People says that from RF900 will fit too but nor from TLR or RF900
slave cylinder is not available in my area.
The pump I'm going to use is from ZXR 750.
Cagiva Raptor 1000
Aprilia SL Falco 1000
Aprilia SL Falco 1000
Re: Clutch slave cylinder on gearbox from GSXR
So I got update on the clutch:
- clutch slave cylinder: Suzuki SV1000
- clutch master cylinder: Kawasaki ZX7 (Nissin)
- push rod: Suzuki TLR 109,5mm
- sprocket cover from Suzuki SV1000 with minor adjustment
Photos soon, have to make some
- clutch slave cylinder: Suzuki SV1000
- clutch master cylinder: Kawasaki ZX7 (Nissin)
- push rod: Suzuki TLR 109,5mm
- sprocket cover from Suzuki SV1000 with minor adjustment
Photos soon, have to make some
Cagiva Raptor 1000
Aprilia SL Falco 1000
Aprilia SL Falco 1000