The rusty work hoss.

[andybaggies]

Had a good idea when I woke up this morning... just use a threaded stud. Araldite/JB weld it into the head and use a brass nut to tighten the clamp.

But it seems you beat me to the bodge!

[nickst4]

Good plan! I put studs into rather loose threads in the exhaust ports of my Suzuki GT550 rather than subject what remained to the scouring action of a bolt being wound in.

Nick

[Craigfell]

That's a good shout that to be fair andy it sounds better than what I've done, but what I've done isn't blowing it just looks crap.



Excuse the flip flops and socks.

[nickst4]

That's a good shout that to be fair andy it sounds better than what I've done, but what I've done isn't blowing it just looks crap.



Excuse the flip flops and socks.

And is that a Covid haircut or just your usual style?

Love the comment at the end, presumably from your beloved: "Why is it so loud?"

Nice to put a cheery face to a contributor!

Nick

[andybaggies]

That's a good shout that to be fair andy it sounds better than what I've done, but what I've done isn't blowing it just looks crap.

Dunno, why I didn't think it before cus that's what I did the first time I removed the exhaust. So much better insurance against seized bolts as well. And as for bodges, if they work then its all good to me.

My hammerited footpeg hangers look lovely to me...

"Why's it so loud"

[Craigfell]

And is that a Covid haircut or just your usual style?

Nick

Purely Covid, i usually have long ish hair, but i get it cut 3 monthly and that happened to be bang on when it all closed.

I'm still Keen on trying the stud method andy, i just dont think the threads gonna hold, plus at this moment in time im praying i had a bike lift.. lying on the floor is getting on my Titties.

[andybaggies]

I'm still Keen on trying the stud method andy, i just dont think the threads gonna hold

One thing in your favour mind is that you don't need to torque the thing right up. With the studs I smeared the port with good old exhaust gunge and used spring washers behind the (brass) nuts. Tightened it up to flatten the spring washer with just a little touch more and we're sorted. You can easily get the studs/nuts from ebay - don't ask me what size though

had a bike lift.. lying on the floor is getting on my Titties

Well that's where you're going wrong... you're facing the wrong way round But tell me about it... in the winter it's not too bad cus you can wear three bulky layers but with in the heat with just a T shirt.... I use old bath towels as 'bedding'.

I also reckon I'm suffering with 'garage knee' - hard crusty white skin on me knee similar to what you get on your heel.

[andybaggies]

Minor thread hijack with photo of the duke.... he's coming along now with the electrics rewired & all working, carbs & filters fitted and temporary 1 litre garage fuel tank bought. Just need to decide on what oil to use... & he'll be ready to fire up.

duke.jpg (180.86 KiB) Viewed 19567 times

[nickst4]

Minor thread hijack with photo of the duke.... he's coming along now with the electrics rewired & all working, carbs & filters fitted and temporary 1 litre garage fuel tank bought. Just need to decide on what oil to use... & he'll be ready to fire up.

Excellent! I thought I'd be way ahead of you with getting my Suzuki GT550 on the road but I'm still working on the oil delivery system, which is rather critical on a two-stroke!

One small tip for you re the Ducati: I think it'll need a chain too!

Nick

[nickst4]

Andy:

Please tell me that orange thing up front isn't a steering damper? With Ducatis of that generation, it's a big problem to get them to do anything other than steer straight ahead!

Sorry Craig; you were telling us about your Raptor?

Nick

[Craigfell]

I don't mind! I'm Jealous, your projects look & sound much more involved than the Rap, i'm just throwing it back together & hoping for the best.

Nick, i know nothing about 2 strokes but when i was younger i was always under the impression it was better to run a pre mix, is that a load of ol' tosh? Or ok in MX bikes?

[nickst4]

Nick, i know nothing about 2 strokes but when i was younger i was always under the impression it was better to run a pre mix, is that a load of ol' tosh? Or ok in MX bikes?

Premix for 2T bikes? Maybe for competition but it's generally been oil injection for a very long time, starting with the Japanese brands. I'm not sure when that started, but my Suzuki is 1975 and it was well before that. One of the problems with pre-mix was that too much oil made the fuel more viscous and that didn't flow through the carb jets so quickly, leading to a weak mixture and seizure despite the oil. Straight fuel is obviously better for carburation, but the pump and delivery have to be pretty accurate. Fortunately, we have synthetic oil these days and that produces much less smoke, but anyone following a 2T will always know, if their sense of smell is good!

Nick

[shebee]

My first bike had a measuring flask as part of the fuel cap, one capful of oil per half gallon of petrol if i remember right?! And yes I am old!

[Craigfell]

I may or may not have gone a little off topic myself.. Got this back yesterday.
Cheap GSXR 6, no mot since may 2019.





Not sure what i'm going to do with it, supposed to be getting the windows on the house done but this came out of that budget, so tensions are high. I wanted a sports bike for my birthday and i got it cheap cheap. (that's not until january so it's hard to justify, to someone )

The plan should be, put the GSXR at the back of the garage, finish the RAP & Flog the bandit. Use the Rap for work and start the GSXR.

Blah

[nickst4]

You mad fool!!

Better watch out that your sensitive other-half doesn't apply sanctions!

Nick