Wanted Standard Raptor Parts

[keithr68]

Hello All
Looking to source, the following standard parts, to fit 2002 1000 raptor, rear mudgard/undertray/numberplate holder unit, clutch leaver bracket, right and left air intake covers.

[Aussiejoe]

All those pieces are made by Trend Italy but their website has been down lately.

Your options are:
Rear Mudguard/Number plate holder: Tail Tidy..do a google search, here's one I found https://www.bikefarmmv.com/en/p/kzhs017 ... ate-holder

Undertray(guessing that's a belly pan): SV1000 one should fit

Clutch Lever Bracket: Convert to a hydraulic clutch, don't need to replace clutch cables. Do a search here for info

Intake Cover: guessing they're the side covers below the seat on either side, Trend Italy for these

Carbon fibre parts are available here https://hfcarbon.de/en/cagiva/raptor/

[andybaggies]

Aha! I see they have carbon parts for both the side panels and underseat panels. They're not cheap mind but still cheaper than scanning & 3D printing. Has any one used these guys & can recommend them?

I'm thinking the OP may be looking for the complete rear mudguard assembly that contains the battery box etc - that may be tough to find.

[andybaggies]

https://www.ebay.co.uk/itm/145549798739 ... Sw4u9loReM

[keithr68]

All those pieces are made by Trend Italy but their website has been down lately.

Your options are:
Rear Mudguard/Number plate holder: Tail Tidy..do a google search, here's one I found https://www.bikefarmmv.com/en/p/kzhs017 ... ate-holder

Undertray(guessing that's a belly pan): SV1000 one should fit

Clutch Lever Bracket: Convert to a hydraulic clutch, don't need to replace clutch cables. Do a search here for info

Intake Cover: guessing they're the side covers below the seat on either side, Trend Italy for these

Carbon fibre parts are available here https://hfcarbon.de/en/cagiva/raptor/

Hi Joe
Thanks for the advice
Tail tidy ? its the standard stuff I'm after.

Undertray(guessing that's a belly pan): its an under tray below the seat

hydraulic clutch not an option

Intake Cover: its the right and left intake covers on the airbox, not the side covers

[keithr68]

https://www.ebay.co.uk/itm/145549798739 ... Sw4u9loReM

Hi Andy
Thanks for the link, sadly that ones for the 650 and it looks to be in a worse state that mine.

[Aussiejoe]

Have a read of this mate, just have to spend a bit of time searching viewtopic.php?p=38109#p38109

Found this https://www.ebay.co.uk/itm/254480222484

and this https://www.ebay.co.uk/itm/385421307596 ... lgQAvD_BwE

and you'll probably have to buy a whole airbox for those intakes https://www.ebay.com/itm/192610897314

left hand intake is available new though https://www.oemmotorparts.com/en/produc ... ake-raptor