Brake & Clutch Levers
Brake & Clutch Levers
Hiya, I have just found an ad on e-bay for lever sets, and the seller says they fit the following bikes:-
CAGIVA RAPTOR 650 2001, RAPTOR 2000 - 2003, KAWASAKI ZR 550 ZEPHER, ZR 750 ZEPHER, ZR 7 1999 - 2003, ZR 1100 ZEPHER 1991 - 1996, ZRX 1200 2001 - 2003, SUZUKI RGV 250 1989- 1996, GSF 400 BANDIT, GS 500 E 1990 - 1996, GSF 600 BANDIT 1995 - 2000, GSX 600 F KATANA 1988 - 1995, GSX 600 F 1998 - 2003, GSXR 600 1997 - 2000, RF 600 R 1993- 1996, GSX 750 1998 - 2001, GSX 750 F KATANA 1989 - 1996, GSX 750 F 1998 - 2003, GSXR 750 1989 1997, GSXR 750 SP 1994, RF 900 R 1994 - 2001, TL 1000 S 1997- 2001, GSXR 1100 1989 - 1996, GSF 1200 BANDIT 2001 - 2003.FRENO LEVE SOLTANTO
Thought this info might help if anyone is looking for replacements.
Miz.
CAGIVA RAPTOR 650 2001, RAPTOR 2000 - 2003, KAWASAKI ZR 550 ZEPHER, ZR 750 ZEPHER, ZR 7 1999 - 2003, ZR 1100 ZEPHER 1991 - 1996, ZRX 1200 2001 - 2003, SUZUKI RGV 250 1989- 1996, GSF 400 BANDIT, GS 500 E 1990 - 1996, GSF 600 BANDIT 1995 - 2000, GSX 600 F KATANA 1988 - 1995, GSX 600 F 1998 - 2003, GSXR 600 1997 - 2000, RF 600 R 1993- 1996, GSX 750 1998 - 2001, GSX 750 F KATANA 1989 - 1996, GSX 750 F 1998 - 2003, GSXR 750 1989 1997, GSXR 750 SP 1994, RF 900 R 1994 - 2001, TL 1000 S 1997- 2001, GSXR 1100 1989 - 1996, GSF 1200 BANDIT 2001 - 2003.FRENO LEVE SOLTANTO
Thought this info might help if anyone is looking for replacements.
Miz.
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
clutch lever for 650
Hi folks
I need a clutch lever for my 650 but cant find the e bay ad listed above, any help appreciated , Cagiva want to send me one from Italy,
Anyone know what Jap bike is the donor?.
Cheers
Pod
I need a clutch lever for my 650 but cant find the e bay ad listed above, any help appreciated , Cagiva want to send me one from Italy,
Anyone know what Jap bike is the donor?.
Cheers
Pod
Stay calm.
Re: clutch lever for 650
hi Podpod wrote:55 years agoHi folks
I need a clutch lever for my 650 but cant find the e bay ad listed above, any help appreciated , Cagiva want to send me one from Italy,
Anyone know what Jap bike is the donor?.
Cheers
Pod
I managed to drop my Raptor (naked 1000) off its side stand and broke the clutch lever.
I tried to find a replacement lever on the web but the closest I could get was an old Suzuki GT 750 (kettle)
It done the job but was not ideal, the shape being different meant that I could spin the starter without pulling in the clutch and the point at which the clutch would bite meant that there was a lot of play in the lever.
It done until I bit the bullet and paid through the nose for a part from 3X to be sent from Italy.
Hope you find a cheaper alternative, if you do let me know
hi guys,
(if the mods allow this here)
i can get aluminium levers and carbon look levers for the rappies!
http://www.q-racing.com/catalog/index.p ... _29_67_800
prices excl. shipping
cheers, jan
(if the mods allow this here)
i can get aluminium levers and carbon look levers for the rappies!
http://www.q-racing.com/catalog/index.p ... _29_67_800
prices excl. shipping
cheers, jan
- stevepratt48
- On the Road
- Posts: 160
- Joined: 17 years ago
- Location: Anglesey
brake and clutch levers
wanted some pazzo race levers for my v raptor after breaking a couple of fingers at work. usual story at dealers,'sorry sir we don't stock anything for cagiva'. no problem i'll have a set for a tl1000s then. £135 later,big problem,brake lever goes straight on,clutch lever just about fits but is really sloppy. solution,buy a clutch handle bar clamp for a suzuki rv125 van van. allows you to keep your mirror and the clutch cut out switch.oh what joy,fully adjustable rolls royce quality levers and two fingered gear changes. almost worth breaking them in the first place.clamp is about 35 quid. does anybody know of a different clutch cable that will fit? i've just had to shell out £73 for one and it took 6 wks to arrive. also where can i get some nice rear sets and what can i hang my silencers off if i fit said rear sets? thanks.
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
http://raptors.ukbikeforum.co.uk/viewtopic.php?p=12261
I still need to connect the clutch switch to start and disconnect it after starting though.
Or get a pushswitch for it, or get some parts from a tl1000s and buy barend mirrors (i'm going for that solution, lol).
I still need to connect the clutch switch to start and disconnect it after starting though.
Or get a pushswitch for it, or get some parts from a tl1000s and buy barend mirrors (i'm going for that solution, lol).
2003 Raptor 1000
Don't steal, the government doesn't like competition.
Don't steal, the government doesn't like competition.