HELP!!!

[zebedee]

Went out for a ride the other day and all was fine and lovely. Now it just won't bloody start. I have removed the leads for the battery charger today but done nothing else at all. Turns over ok but will not go at all. After cranking a bit the FI warning comes up. Switch off and back on again and its turning over no problems. Shorted the diagnostic plug into dealer mode and, when first switched on, it C 00 so no fault codes then it goes to C12. Great now i have a code but no idea what it means. I am guessing that if it was the stand switch it would not go at all and same with clutch switch. I have bridged the clutch switch and this makes no difference. I desperately need to start the bike in the morning. I am hoping its something really stupid and simple. HEEEEELP!

[bazzywazz]

Probably just a bad connector. Download the manual
http://rapidshare.com/files/117941978/C ... 1.pdf.html
Read page C38 and check the connectors behind the L/H sidepanel.

[snapdragon]

Checked the battery terminals? earth?

C12 is crankshaft position sensor

I'd check/clean/refit all and any connectors

p.s. Raptors often don't like optimates

[zebedee]

You two are complete stars thank you. Me, with my clumpy firefighters hands probably have dislodged somethiing. Will check in the am. It wasn't an optimate and I only connected it when it needed charging having read Snaps' previous on Optimates eating Raptors.

[shebee]

Kill switch?.... just a thought cos I never use mine so when Boss took the Raptor out to play and killed it on the switch it took ages for me to work out what the problem was!

[pod]

The position sensor wires on my 650 come up to a white connector block on the LHS at the front of where the seat sits, I had hassle with this earlier this year, would turn over but not fire.
Cleaned and all is good now.
HTH
pod

[zebedee]

Thanks all. Iffy connector block all sorted now.

Z

[Bloke23uk]

Anyone no what c13 c23 c21 fault codes are please

[snapdragon]

Anyone no what c13 c23 c21 fault codes are please

nope, sorry do you have all those showing? woooow

[andybaggies]

Anyone no what c13 c23 c21 fault codes are please

Well I just happen to have my freshly printed & filed workshop manual next to me and I can catergorically say that:

C13 - Intake air pressure sensor
C23 - Tip over sensor
C21 - Intake air temp sensor

Andy B

[Bloke23uk]

Thanks mate got tip over sensor order just trying to find a temp sensor would you no if the tl1000 temp sensor will fit on the raptors

[andybaggies]

would you no if the tl1000 temp sensor will fit on the raptors

I couldn't say with 100% certainty but I'd be really surprised if it doesn't