Page 1 of 1
Brake Pads
Posted: |June 3rd, 2009|, 9:37 pm
by taz_116
Just wondering if anyone on here is using Carbon Ceramic Pads on thier V-Rap. Is there any noticable improvement over standard Brembo pads?
i need to change all the pads on the bike so was thinking of treating it to them, but only if there is a major difference in breaking.
Si
Re: Brake Pads
Posted: |July 21st, 2011|, 1:36 am
by Hairy_Mark
If you're talking about the standard pads (Brembo Frendo 222) using teflon pads
would be an improvement. I swapped mine to EBC HH pads and got a good
improvement, both in power and feel. The EBC part code for fronts is FA244HH. I don't know
the code for the rears because I didn't change them. hope that helps.
P.S. the pads were tested by a car driver overtaking around the first bend, as I was bedding
them in. They pulled the bike up fine !
Re: Brake Pads
Posted: |January 13th, 2015|, 3:10 pm
by 03raptorincalifornia
Anyone have codes for the rear brakes? Been looking at replacing them, only to keep using the wrong ones (111 for Suzuki TL 2001 model [S maybe?]).
Re: Brake Pads
Posted: |January 13th, 2015|, 11:39 pm
by Dante
At EBC codes are FA266 for rear.