Raptor Chapter

Hi does anybody know where i could find my blinker relay , i fitted led blinkers but they dont work , i want to change my blinker relay but cant find it , my raptor is a 2006 ie one , heeeeeeelp

pretty sure its under the seat, but if you have fitted LED indicators you will probably need ballast resistors too to get them to work with your relay.

Some LED indicators come with resistors fitted but most dont.

HTH

the indicator relay on my bike was only round relay under the seat,i have led indicators on the back and didnt have to use resistors on them,

tyremuncher wrote:55 years agothe indicator relay on my bike was only round relay under the seat,i have led indicators on the back and didnt have to use resistors on them,

I have limited knowledge about this but it may be because you still have 'proper' ones at the front. Problems arise when replacing all indicators.

you will definatly need resistors if your changing all of them,there on ebay for not much cash.

Hi, I changed blinkers with led-relay.
I purchased this one.　
http://www.dirtfreak.co.jp/products/drc ... /main.html

My raptor is a 2005 ie

Rap650_jp wrote:55 years agoHi, I changed blinkers with led-relay.
I purchased this one.　
http://www.dirtfreak.co.jp/products/drc ... /main.html

My raptor is a 2005 ie

Thanks my raptor is a 2006 650ie , i will gize it a shot.

Thanks again

darn it! wish I had seen that picture before I went thru all of the Relays and removed them one by one until I found that thing in that red circle! lol
now what kinda relay do I need for Led lights? Can I use a car relay?

HEIN GERRICKE do one 31641910026 for 3 pin electronic relay for leds

I tried opening my relay to mod it like this. http://www.instructables.com/id/Automot ... atics/?f=m
However they glued inside the flasher box with 5 pounds of epoxy! Wtf? So i think o damaged mine. They sell cheap scooter relays im town i was gonna try one of those however my relay had 2 pins . It says 2 x 10 watts on it and the one u showed on the link has 3 pins?? Where does the third cable go? My flasher relay was electeonic i still dont understand why it dims my leds instead of flashing fast like other bikes... Can someone enlighten me on this matter? Can i possibly use a scooter or car flasher with 2 pins? Thanks

just fitted led indicators to my 2001 raptor 650 and when you switch indicators on they dont flash fast they just come on once they go out is this the same problem i.e new flasher unit needed and mine has only 2 pins so just buy 2 pin replacement yes ?

either change flasher unit for suitable one for led indicators(as in this topic) or fit resistors across each indicator.

Crap Tartan wrote:55 years agoeither change flasher unit for suitable one for led indicators(as in this topic) or fit resistors across each indicator.

many thanks for your help

Hello there, I'm switching to original blinkers (my dog ate the LED ones, NOT FUNNY !http://www.raptorchapter.org.uk/posting ... =15&t=3061#) and I seem to be lacking the original blinker relay. Does anyone have an OEM or a part code that I cand find ? I can't seem to find it on the interweb .

Thank you, in advance !

any 3 pin 12v flasher relay should work, doesnt need to be LED type if you are going abck to original type indicators/bulbs.