Thank you monkeyshed I finally confirmed that your sequence(hopefully as seen on your bike) is what the numbers are on the Italian Diagram that I downloaded from the Italian Raptor website. Gruppog_2.pdf Gruppog3.pdf. I translated the components on the diagram and this is what I came up with. I think the italians ran out of the cables and decided to use close colors on the harness which sucks because it costs a fortune to get the harness replaced! and its a very hard labour. anyway I made some corrections on what you gave me and I really appreciate for your help. please keep this as reference as my cables are off and I will use my voltmeter again to trace the cables now I at least have and idea about how the sequence goes. the numbers below the speedo in circles are I think the pin numbers.... I already know how they go on the circuit as I dismanteled the whole unit and started probing it with my multimeter. whats scaring me is Pin 8 looks like the Earth for the indicators and high beam on my circuit when I tested it and 16 also looks like the Earth for the whole circuit... Oh crap I guess Im at least getting somewhere.... My cables are off and this is still like a chinese puzzle. like a mega rubics cube! lol thank you for your participation
pin 1 (Earth on Diagram)
pin 2 green blue (28 coolant temperature sensor alarm)
pin 3 pink = 14 oil presssure switch
pin 4 black violet =low fuel (Not connected on the Diagram)
pin 5 violet =low fuel
pin 6 yellow = Lights (Hazards? on the 8 Right control unit)
pin 7 black white = vehicle safety ( 9 ignition coil front cylinder)
pin 8 white = Hi-lo Beam
pin 9 Not Connected
pin 10 white violet = speed
pin 11 white orange = speed
pin 12 blue = ground(earth)
pin 13 green red
pin 14 green grey = rev counter (30 safety device on diagram)
pin 15 red black indicator (+ 12v Right Signal?)
pin 16 lt blue indicator (+12v Left Signal?)
PS if my bike blows up at least you guys know why! lol
need help! wiring diagram with Colors on Raptor 650 please..
-
- On the Road
- Posts: 70
- Joined: 13 years ago
-
- Posts: 3
- Joined: 9 years ago
Re: need help! wiring diagram with Colors on Raptor 650 please..
Hi folks,
I bought a Raptor 650 a while ago, the owner had bodged some very dodgy Chinese clocks on to it. Over the winter I've done a few jobs on it, including sourcing some other not so dodgy Chinese clocks for it (I never liked the Raptor clocks, had a Raptor 1000 before). I've read through the posts on the forum, my wiring seems different to everyone else's. The bike is a 2007 Raptor 650ie.
Since I didn't have the original clocks to start with, I don't know the pin order.
I think the following is correct....
Black - LH Ind.
Black/Grn - RH Ind
Yellow - High/Low Hlight
Blu/Blk - Water...I think
Grn/Grey (maybe White) - Tacho....?
Blue x 2 - Earth
Orange/Grn x 2 - Power/Pos (only with Ignition on)
There are also....
Pink - Oil pressure....?
Pink/Blk - ?
Pink/Yellow - ?
Grn/Yellow - ?
Does the 650 have a side stand warning light? I don't know any one else with a Raptor 650 I can compare it to you see.
Cheers for any help you can provide
I bought a Raptor 650 a while ago, the owner had bodged some very dodgy Chinese clocks on to it. Over the winter I've done a few jobs on it, including sourcing some other not so dodgy Chinese clocks for it (I never liked the Raptor clocks, had a Raptor 1000 before). I've read through the posts on the forum, my wiring seems different to everyone else's. The bike is a 2007 Raptor 650ie.
Since I didn't have the original clocks to start with, I don't know the pin order.
I think the following is correct....
Black - LH Ind.
Black/Grn - RH Ind
Yellow - High/Low Hlight
Blu/Blk - Water...I think
Grn/Grey (maybe White) - Tacho....?
Blue x 2 - Earth
Orange/Grn x 2 - Power/Pos (only with Ignition on)
There are also....
Pink - Oil pressure....?
Pink/Blk - ?
Pink/Yellow - ?
Grn/Yellow - ?
Does the 650 have a side stand warning light? I don't know any one else with a Raptor 650 I can compare it to you see.
Cheers for any help you can provide
Re: need help! wiring diagram with Colors on Raptor 650 please..
No the Rap doesn't have a stand warning light.
-
- Posts: 3
- Joined: 9 years ago
Re: need help! wiring diagram with Colors on Raptor 650 please..
Ok, thanks. Do you know if the 650 has a Neutral light? I've tested the rest of the wires and none of them change behaviour when I flick in and out of Neutral. If it does have a light, what colour is the wire? Thanks in advance for any help anyone can offer.
- Crap Tartan
- On the Road
- Posts: 1545
- Joined: 17 years ago
- Location: Sitting in front of the screen in Portpatrick again
Re: need help! wiring diagram with Colors on Raptor 650 please..
Wife used to have a 650ie and it defo had a nuetral light.
Cant tell you anymore as its long sold!!
Cant tell you anymore as its long sold!!
nil illigitimae carborundum
Re: need help! wiring diagram with Colors on Raptor 650 please..
Yes it has neutral light but I cant help you with the color.
Re: need help! wiring diagram with Colors on Raptor 650 please..
My 2001 650 , came with a wiring diagram in the owners book, the neutral switch ( gear sensor) has 4 wires coming out, B ( common earth) OY goes to terminal 11 ECU, BW goes to terminal 9 ECU, YG goes to " vehicle safety" a small diode block to prevent backfeeds through neutral switch I think.
The neutral switch does two jobs, it is an interlock to kill ignition if the side stand is down and a gear is engaged, also tell the ECu to remap for idling in neutral.
The neutral switch does two jobs, it is an interlock to kill ignition if the side stand is down and a gear is engaged, also tell the ECu to remap for idling in neutral.
Stay calm.