Suzuki Swing arm/chain slider
-
- On the Road
- Posts: 70
- Joined: 13 years ago
Suzuki Swing arm/chain slider
Ok its pain to buy online for me so does cagiva use the same swingarm as the suzuki tl or dl so i could use a chain slider from a suzuki? I really dont want a use rubber from and old tire please help thanks
- Crap Tartan
- On the Road
- Posts: 1545
- Joined: 17 years ago
- Location: Sitting in front of the screen in Portpatrick again
Re: Suzuki Swing arm/chain slider
Pretty sure the swingarm on the raptor is totally differant from any Suzuki item so wouldnt think it would fit but am not familiar with the suzuki items.
nil illigitimae carborundum
Re: Suzuki Swing arm/chain slider
I took my thread bare original off and got hold of a Teflon sheet 4mm thick....
I used the original as a template and cut a new one out with a jigsaw drilled the location hole at the front and the 2 6mm holes to hold the piece in place on the top and bottom of the swing arm.....
It makes no nasty clattery noises and just slides and protects...
I should of taken some pictures before mounting it
Cheers,
Paul.
I used the original as a template and cut a new one out with a jigsaw drilled the location hole at the front and the 2 6mm holes to hold the piece in place on the top and bottom of the swing arm.....
It makes no nasty clattery noises and just slides and protects...
I should of taken some pictures before mounting it
Cheers,
Paul.
-
- On the Road
- Posts: 70
- Joined: 13 years ago
Re: Suzuki Swing arm/chain slider
Dear Paul i also have the old piece in hand cant do tire rubber due to the cables in them i thought about using a thinner bicycle tire but its not wide enough anyway where can i find the teflon rubber sheet? its so hard to get a hold of stuff like thst where i live..
Re: Suzuki Swing arm/chain slider
Well we have teflon sheets at work....
We use it for it's low friction properties and it's ability to withstand reasonably high temperatures (250c )
It's not rubber it's actually more like plastic sheet.
Maybe you can find it in DIY stores?
Cheers and good luck!
Paul.
We use it for it's low friction properties and it's ability to withstand reasonably high temperatures (250c )
It's not rubber it's actually more like plastic sheet.
Maybe you can find it in DIY stores?
Cheers and good luck!
Paul.
- shebee
- Site Admin
- Posts: 2210
- Joined: 22 years ago
- Facebook address thingy: facebook.com/shebee.duff
- Has thanked: 4 times
- Been thanked: 8 times
Re: Suzuki Swing arm/chain slider
Plums wrote:Well we have teflon sheets at work....
We use it for it's low friction properties and it's ability to withstand reasonably high temperatures (250c )
It's not rubber it's actually more like plastic sheet.
Maybe you can find it in DIY stores?
Cheers and good luck!
Paul.
What exactly is it that you do? .. I have a very dodgy mental image now... sorry - too much wine
Twisted Tequila Sister
Re: Suzuki Swing arm/chain slider
Now that would be telling
Working at CERN and having to adapt make and modify things that don't exist often leads use to have to create our own solutions
Can come in handy for foreigners to
Honestly half of my cars and bike and Rap are secretly sponsored by my work.... Shhhhh mums the word
I think if you google Teflon sheet you may find some suppliers...
Working at CERN and having to adapt make and modify things that don't exist often leads use to have to create our own solutions
Can come in handy for foreigners to
Honestly half of my cars and bike and Rap are secretly sponsored by my work.... Shhhhh mums the word
I think if you google Teflon sheet you may find some suppliers...
-
- APM
- Posts: 908
- Joined: 13 years ago
- Location: Cumbria
Re: Suzuki Swing arm/chain slider
You could try making one from nylon block or sheet which should be a lot easier to get hold of. Most engineering workshops should have a scrap lying about (its used for bearing pads and was used for chain guides on bikes)
Bit of a Muppet
Re: Suzuki Swing arm/chain slider
You can order some from eBay ! http://shop.mobileweb.ebay.co.uk/search ... et&x=0&y=0
Good luck!
Cheers Paul
Good luck!
Cheers Paul
Re: Suzuki Swing arm/chain slider
Hey guys,Plums wrote:You can order some from eBay ! http://shop.mobileweb.ebay.co.uk/search ... et&x=0&y=0
Good luck!
Cheers Paul
I can't find a 4 mm sheet that is long enough. Just 300 mm sheets, need 450 mm for the chain slider.
Any tips where I can find a sheet or the original part?
Re: Suzuki Swing arm/chain slider
I purchased a chain slider from a SV650.
Needed a bit of modding to fit,but nothing difficult.
Needed a bit of modding to fit,but nothing difficult.
- shebee
- Site Admin
- Posts: 2210
- Joined: 22 years ago
- Facebook address thingy: facebook.com/shebee.duff
- Has thanked: 4 times
- Been thanked: 8 times
Re: Suzuki Swing arm/chain slider
Might be worth giving this bunch a contact? http://www.ebay.co.uk/itm/PTFE-Sheet-En ... 645c13cb37Arkivet wrote:Hey guys,Plums wrote:You can order some from eBay ! http://shop.mobileweb.ebay.co.uk/search ... et&x=0&y=0
Good luck!
Cheers Paul
I can't find a 4 mm sheet that is long enough. Just 300 mm sheets, need 450 mm for the chain slider.
Any tips where I can find a sheet or the original part?
Twisted Tequila Sister
Re: Suzuki Swing arm/chain slider
Thanks shebee! But the seller doesn't offer international postage. I live in Sweden...shebee wrote:Might be worth giving this bunch a contact? http://www.ebay.co.uk/itm/PTFE-Sheet-En ... 645c13cb37Arkivet wrote:Hey guys,Plums wrote:You can order some from eBay ! http://shop.mobileweb.ebay.co.uk/search ... et&x=0&y=0
Good luck!
Cheers Paul
I can't find a 4 mm sheet that is long enough. Just 300 mm sheets, need 450 mm for the chain slider.
Any tips where I can find a sheet or the original part?
Hmm... Worth looking into. Thanks Dante! I'm getting more and more desperate, I just wanna ride my V Raptor 1000.Dante wrote:I purchased a chain slider from a SV650.
Needed a bit of modding to fit,but nothing difficult.
- shebee
- Site Admin
- Posts: 2210
- Joined: 22 years ago
- Facebook address thingy: facebook.com/shebee.duff
- Has thanked: 4 times
- Been thanked: 8 times
Re: Suzuki Swing arm/chain slider
Might be worth giving them a call direct... I have found a phone number +44 1482 610110 GFG Fabrications. If they do it at the right price and wont ship to you you could get it shipped to me and i will forward it to you if that helps?
Twisted Tequila Sister
Re: Suzuki Swing arm/chain slider
shebee,
I found that the same seller offred international shipping here: http://www.ebay.co.uk/itm/3MM-PTFE-SHEE ... 1188234056?
But I think 3mm is to thin, so I contacted the seller if it's possible to order a 4mm sheet (in the other aution i couldn't contact the seller about the shipping).
Thanks for the offer to forward the shippment to me, I'll keep it in mind if the seller isn't willing to send me a 4mm sheet
I found that the same seller offred international shipping here: http://www.ebay.co.uk/itm/3MM-PTFE-SHEE ... 1188234056?
But I think 3mm is to thin, so I contacted the seller if it's possible to order a 4mm sheet (in the other aution i couldn't contact the seller about the shipping).
Thanks for the offer to forward the shippment to me, I'll keep it in mind if the seller isn't willing to send me a 4mm sheet