Had a little oopsie today leaving work. Front wheel locked up and sent me down. Only some minor damage which shouldnt be too expensive to replace
Scratched the tank
And the front fairing :/
The reservoir has snapped from the screw and is currently held on with tape. Need a new one of these :/
Handbar is bent! Is it possible to get clip-ons for the Raptor?
This whole RH assembly has snapped. Need a new one for front brake lever. Anyone know where I can get one?
All in all, bad day out
Yowch
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
Re: Yowch
Thanks for the tip. Will look into it. Im not too bad, just a few bruises really. More gutted abour the bike
As the handlebar is slightly bent and all the other stuff needs replacing, I was thinking about swapping the forks out for a GSXR set if its possible?
As the handlebar is slightly bent and all the other stuff needs replacing, I was thinking about swapping the forks out for a GSXR set if its possible?
- Crap Tartan
- On the Road
- Posts: 1545
- Joined: 16 years ago
- Location: Sitting in front of the screen in Portpatrick again
Re: Yowch
98-00 R1 forks fit straight into yokes, minor mods needed to R1 spindle to make it fit Rap wheel.
lots of suzi RHS brake perch will fit, aftermarket bars will fit without too much problem as long as they are not radically differant to original, clip-ons may require cable/wiring/etc modding to fit but everything is do-able.
Fit crash bungs in future to protect your tank from that kind of damage.
lots of suzi RHS brake perch will fit, aftermarket bars will fit without too much problem as long as they are not radically differant to original, clip-ons may require cable/wiring/etc modding to fit but everything is do-able.
Fit crash bungs in future to protect your tank from that kind of damage.
nil illigitimae carborundum