Page 1 of 1

rubber boots!!!!!

Posted: |July 6th, 2013|, 8:48 am
by yeah!
Howdi....

4 and 6 degrees these mornings and cold riding to work....in perth, western australia...

The rubber boot on my radiator fan switch ( bottom right side of radiator whilst sitting on it ) is almost totally rooted and covered in electrical tape , because my cagiva parts guy has no listing for it. Neither do O.E.M.Motorparts.com. There's connections under it so it is needed.

I looked at the Vraptor parts list and no joy...

It looks like it was on from the factory build but does anyone know from where I can get one??

Thanks for all your tips ...

yeah!

Re: rubber boots!!!!!

Posted: |August 14th, 2013|, 4:02 pm
by Spyke
Hi yeah!, I'm in Perth too! I can't help with your rubber boot, but I have noticed that Autopro Innaloo have recently started selling Plastidip - see http://www.plastidip.net.au/plasti-dip, it's a spray on plastic coating that can be picked off again when you tire of it, that may help solve your problem with keeping your electrics sealed?

Re: rubber boots!!!!!

Posted: |February 8th, 2014|, 10:43 am
by yeah!
Thanks Spyke! I have a tin of red plasti dip but it's now gone hard.. Time to buy some more.

Re: rubber boots!!!!!

Posted: |February 8th, 2014|, 11:29 am
by Spyke
You're welcome mate, black would probably look better anyway!

I was keen to try the stuff on something so I did a pair of el-cheapo mirrors and it worked as advertised - but I used the whole tin on two small mirrors so the stuff doesn't go very far! I had the mirrors hung up from fishing line on my pergola so perhaps the very minor draft blew lots away.

And I WILL try again with that photoshoot, once temps are relatively reliably reasonable!

Re: rubber boots!!!!!

Posted: |February 8th, 2014|, 5:33 pm
by ozzraptor
Looks like that rubber piece is part of the wiring harness. I dont remember the sv as having that rubber piece.

Re: rubber boots!!!!!

Posted: |March 21st, 2015|, 9:47 am
by yeah!
Hello all!

I used many layers of Plastidip, a paint on rubber product. A few months later it's gone rock hard ( probably the heat ) ....boo....

Yeah!

Re: rubber boots!!!!!

Posted: |March 21st, 2015|, 5:11 pm
by ozzraptor
Argh! That rubber boot as i said is part of the actual main wiring loom. I had a spare loom and stole one off that but they are not made to come off!

Re: rubber boots!!!!!

Posted: |March 22nd, 2015|, 7:37 am
by Miz
yeah! wrote:Howdi....

4 and 6 degrees these mornings and cold riding to work....in perth, western australia...

The rubber boot on my radiator fan switch ( bottom right side of radiator whilst sitting on it ) is almost totally rooted and covered in electrical tape , because my cagiva parts guy has no listing for it. Neither do O.E.M.Motorparts.com. There's connections under it so it is needed.

I looked at the Vraptor parts list and no joy...

It looks like it was on from the factory build but does anyone know from where I can get one??

Thanks for all your tips ...

yeah!
Hi,

PM me your address, I'll send you one of these

Image

You will need to cut it and superglue it to get it over the plug.