vrap 1000 wiring diagram

General spannery stuff
Post Reply
1add2
On the Road
Posts: 41
Joined: 16 years ago
Location: poole

vrap 1000 wiring diagram

Post by 1add2 »

does anyone have a clear readable wiring diagram? i have seen many including the one in this forum but they are not clear enough, especialy the left hand handlebar switches and ecu. if anyone does have a good copy can i have one please
User avatar
Miz
On the Road
Posts: 818
Joined: 19 years ago
Location: Derby

Re: vrap 1000 wiring diagram

Post by Miz »

What are you wanting to find out??
152/999
Image
Image
1add2
On the Road
Posts: 41
Joined: 16 years ago
Location: poole

Re: vrap 1000 wiring diagram

Post by 1add2 »

i have just fitted a hi/lo h4 led headlight bulb and the pass light would not work, the bulb worked wonderfully but not the pass light. i figured it out in the end, all i had to do was swap the positions of the blue and white wires on the bulb connector and now everything works as it should. the light output is about as good as the 35w hid but it is only 25w, i did notice when on hi beam both led chips illuminate at the same time, apparently this is completely normal according to manufacturer,i checked how many amps it was using
lo-1.9 amps
hi-2.08 amps
this is within spec
i could still do with a good copy of wiring diagram for future ref
User avatar
Spyke
On the Road
Posts: 803
Joined: 11 years ago
Location: Down Under

Re: vrap 1000 wiring diagram

Post by Spyke »

Here's a PDF of the wiring diagram from the back of my Xtra user manual - your V should be the same, I think.

It's too big to add as an attachment, so I loaded it to PDFHOST: http://www.pdfhost.net/index.php?Action ... d3a4def6e0

It was too big to fit on my scanner so you'll have to print out the two pages and stick them together with sticky tape!
Road racing's where it's at - going round in circles all day is for hamsters.
shedmonkey
APM
Posts: 908
Joined: 13 years ago
Location: Cumbria

Re: vrap 1000 wiring diagram

Post by shedmonkey »

Thats great spyke nice and big
Bit of a Muppet
1add2
On the Road
Posts: 41
Joined: 16 years ago
Location: poole

Re: vrap 1000 wiring diagram

Post by 1add2 »

cheers Spyke that is the clearest one i have ever seen
User avatar
Spyke
On the Road
Posts: 803
Joined: 11 years ago
Location: Down Under

Re: vrap 1000 wiring diagram

Post by Spyke »

Managed to get the wiring diagram scanned on a large scanner so here it is in one page glory! :o
WiringScan.jpg
WiringScan.jpg (250.53 KiB) Viewed 5680 times
I reduced the attachment size above to get past the 256 limit, but If you want the 463KB version head to http://i57.tinypic.com/2igbzeq.jpg -
Image
Wiring.jpg
Wiring.jpg (132.74 KiB) Viewed 5618 times
:tada:
Last edited by Spyke on |October 16th, 2015|, 5:49 pm, edited 2 times in total.
Road racing's where it's at - going round in circles all day is for hamsters.
User avatar
snapdragon
Moderator
Posts: 3245
Joined: 21 years ago
Location: Wiltshire

Re: vrap 1000 wiring diagram

Post by snapdragon »

I keep looking but I can't see Waterloo or the Bakerloo line on that tube map :blink:
SnappY
~~X~X~{:>
User avatar
shebee
Site Admin
Posts: 2210
Joined: 21 years ago
Facebook address thingy: facebook.com/shebee.duff
Has thanked: 4 times
Been thanked: 8 times

Re: vrap 1000 wiring diagram

Post by shebee »

Excellent, thanks... Since my speedo decided not not play this weekend this may well be very useful soon!


Sent from my iPad using Technical magic
Twisted Tequila Sister
User avatar
Spyke
On the Road
Posts: 803
Joined: 11 years ago
Location: Down Under

Re: vrap 1000 wiring diagram

Post by Spyke »

snapdragon wrote:55 years agoI keep looking but I can't see Waterloo or the Bakerloo line on that tube map :blink:
:mrgreen:
Road racing's where it's at - going round in circles all day is for hamsters.
yeah!
On the Road
Posts: 61
Joined: 11 years ago

Re: vrap 1000 wiring diagram

Post by yeah! »

Thanks a lot Spyke.....!!!!!!!!!!!!!!!!!!
User avatar
Spyke
On the Road
Posts: 803
Joined: 11 years ago
Location: Down Under

Re: vrap 1000 wiring diagram

Post by Spyke »

You're most welcome yeah!.

I'm now a bit concerned about number 31 - "Jogging" :haha:

WTF is that?!
Road racing's where it's at - going round in circles all day is for hamsters.
ozzraptor
On the Road
Posts: 718
Joined: 10 years ago

Re: vrap 1000 wiring diagram

Post by ozzraptor »

jogging > intermittence :blink: ? looks like it runs to the turn signal , i know what number 9 is, the thing that melted on my exhaust :angry: I did bit of a search and found that i am not the only one to have unsecured wiring drop on to the exhaust. Make sure everything around there is secured properly.
Giocast
On the Road
Posts: 36
Joined: 8 years ago
Location: Dorking

Re: vrap 1000 wiring diagram

Post by Giocast »

Thanks Spyke :) - slightly off-topic but reason I am studying diagram is to try and work out which (if any) sensors can be disabled without affecting performance as I contemplate removing all emission equipment and plumbing - can anyone point me to a thread that deals with this? if not I will just start a fresh one.
Post Reply