Raptor wont start. No fuel.
Posted: |December 16th, 2013|, 1:18 am
Hi everyone.
I developed some sort of electrical glitch thats stopping the rap from running.
Had an issue with the TPS awhile back and got a replacement from Suzuki dealer bike was running fine and stopped running in the same way as it did before replacing the TPS and did same tests as before and found that the TPS is still working fine.
The motor turns over but wont start as there is no fuel being injected. The injectors spray ONE burst when pressing the start button but nothing further than that. The engine sparks the plugs spark but with no fuel well its not going to run.
uu
There is no FI error on the display the TPS is in the right position after putting in dealer mode gives -c00 so thats fine. Replaced the batery and everything is 100% there. Checked the fuel pump and everything is fine there is enough pressure. Checked clutch switch and no issues there. Sidestand switch is working but bike wont start no matter if its up or out. Got the injectors tested and they work fine no issues.
Anyone ever experienced anything like this? Ive gone through every post I could search regarding anything like this but cant find anything.
Thanks in advance.
I developed some sort of electrical glitch thats stopping the rap from running.
Had an issue with the TPS awhile back and got a replacement from Suzuki dealer bike was running fine and stopped running in the same way as it did before replacing the TPS and did same tests as before and found that the TPS is still working fine.
The motor turns over but wont start as there is no fuel being injected. The injectors spray ONE burst when pressing the start button but nothing further than that. The engine sparks the plugs spark but with no fuel well its not going to run.
uu
There is no FI error on the display the TPS is in the right position after putting in dealer mode gives -c00 so thats fine. Replaced the batery and everything is 100% there. Checked the fuel pump and everything is fine there is enough pressure. Checked clutch switch and no issues there. Sidestand switch is working but bike wont start no matter if its up or out. Got the injectors tested and they work fine no issues.
Anyone ever experienced anything like this? Ive gone through every post I could search regarding anything like this but cant find anything.
Thanks in advance.