Raptor Chapter

does anyone know the model type of the front brembo calipers fitted to the 1000 vraptor . or the ref code of the piston and seal rebuild kit .my pistons are pitted and the seals are fooked and i need to fix them quickly

thanks

Seal kit on e-bay

http://www.ebay.co.uk/itm/181589235536? ... EBIDX%3AIT

Hope that helps.

thanks miz thats great , i also need the pistons aswell

I have the front brembo brakes complete from mine unused for years as I fitted an R1 front end on mine. Any use?

after hours of searching i found the caliper ref numbers 20.6800.10 left hand, 20.6800.20 right hand, the rear is 20.6951.51 , rear master cylinder is 10.4776.53. the front calipers are the same as fitted to most of the ducati monster range
for future reference

Hi there,
Ural motorcycles had brembo's fitted to some models in Australia.
there is a fairly comprehensive manual available which explains brembo caliper repair in detail.
http://cvkustoms.com/PDF/Brembo_Disc_Brakes.pdf
of course there is lots of other stuff but it's the only place that I have found that lists part numbers and explains caliper rebuild in detail,
The 1000 manual also helps with torque valves.
cheers
Al

That's the right Caliper.

Has anybody measured the length of the pistons while out of their calipers and consider aftermarket generic pistons?

And by "right", I mean 'correct', as it's a left caliper. Mounted on the right. Right?