Hello, trying to fit a GIPro gear indicator to the bike, failing
Need a 12 Volt wire that's switched with the ignition but stays on with the kill switch.
There's a tiny review from Ozzraptor on the GIPro site so I guess he's fitted one OK - how did you do it?
Instructions say use brake light +ve but none of the contacts on the rear brake light give 12V unless brake light is on.
Help please!!
12 Volts - Gear Indicator - Paging Ozzraptor!!!
Re: 12 Volts - Gear Indicator - Paging Ozzraptor!!!
Ozzraptor took his 12v from the fusebox. Took a link from the protected side of the ignition fuse and success, gear indicator installed and working. Thanks for help!
Re: 12 Volts - Gear Indicator - Paging Ozzraptor!!!
Good to hear mate Have you tried the different tre settings, i set mine for 5th gear but i really could not tell much difference in the settings seat of pants dyno