Hi,
I've just obtained a 2002 Cagiva V Raptor 1000. It has been off the road for 5 years so there's lots to do. Can anyone tell me how to put the bike into user/dealer mode? (pictures would be good) I've never owned one of these before.
There is an old topic covering this but the pictures seem to have been removed.
Ciao
v Raptor 1000 - User Mode
- shebee
- Site Admin
- Posts: 2210
- Joined: 21 years ago
- Facebook address thingy: facebook.com/shebee.duff
- Has thanked: 4 times
- Been thanked: 8 times
Re: v Raptor 1000 - User Mode
Hi and welcome. There is a picture of the dealer mode wire loop about halfway down on the first page of this post. Hope it helps viewtopic.php?f=16&t=3333&p=22158&hilit ... des#p22152
And on the 2nd page of this one viewtopic.php?t=1046&start=15
And on the 2nd page of this one viewtopic.php?t=1046&start=15
Twisted Tequila Sister
Re: v Raptor 1000 - User Mode
Hi,
Has anyone tried using an Opel/Vauxhall 10 Pin ODB2 converter to plug into the Cagiva 10 Pin test plug?
This looks like it was designed to do the job, but as it plugs directly into the command module I'm reluctant to just plug one into my "currently working OK" unit just to test.
This could be worth a shot if someone has an already faulty/suspect command unit. But I'm not sure of the effect on the unit should it not be compatible.
Ciao
Has anyone tried using an Opel/Vauxhall 10 Pin ODB2 converter to plug into the Cagiva 10 Pin test plug?
This looks like it was designed to do the job, but as it plugs directly into the command module I'm reluctant to just plug one into my "currently working OK" unit just to test.
This could be worth a shot if someone has an already faulty/suspect command unit. But I'm not sure of the effect on the unit should it not be compatible.
Ciao