Page 1 of 1
Wanted Standard Raptor Parts
Posted: |January 28th, 2024|, 6:50 pm
by keithr68
Hello All
Looking to source, the following standard parts, to fit 2002 1000 raptor, rear mudgard/undertray/numberplate holder unit, clutch leaver bracket, right and left air intake covers.
Wanted Standard Raptor Parts
Posted: |January 28th, 2024|, 11:37 pm
by Aussiejoe
All those pieces are made by Trend Italy but their website has been down lately.
Your options are:
Rear Mudguard/Number plate holder: Tail Tidy..do a google search, here's one I found
https://www.bikefarmmv.com/en/p/kzhs017 ... ate-holder
Undertray(guessing that's a belly pan): SV1000 one should fit
Clutch Lever Bracket: Convert to a hydraulic clutch, don't need to replace clutch cables. Do a search here for info
Intake Cover: guessing they're the side covers below the seat on either side, Trend Italy for these
Carbon fibre parts are available here
https://hfcarbon.de/en/cagiva/raptor/
Wanted Standard Raptor Parts
Posted: |January 29th, 2024|, 12:43 am
by andybaggies
Aha! I see they have carbon parts for both the side panels and underseat panels. They're not cheap mind but still cheaper than scanning & 3D printing. Has any one used these guys & can recommend them?
I'm thinking the OP may be looking for the complete rear mudguard assembly that contains the battery box etc - that may be tough to find.
Wanted Standard Raptor Parts
Posted: |January 29th, 2024|, 5:19 am
by andybaggies
Wanted Standard Raptor Parts
Posted: |February 2nd, 2024|, 5:11 am
by keithr68
Aussiejoe wrote: ↑3 months ago
All those pieces are made by Trend Italy but their website has been down lately.
Your options are:
Rear Mudguard/Number plate holder: Tail Tidy..do a google search, here's one I found
https://www.bikefarmmv.com/en/p/kzhs017 ... ate-holder
Undertray(guessing that's a belly pan): SV1000 one should fit
Clutch Lever Bracket: Convert to a hydraulic clutch, don't need to replace clutch cables. Do a search here for info
Intake Cover: guessing they're the side covers below the seat on either side, Trend Italy for these
Carbon fibre parts are available here
https://hfcarbon.de/en/cagiva/raptor/
Hi Joe
Thanks for the advice
Tail tidy ? its the standard stuff I'm after.
Undertray(guessing that's a belly pan): its an under tray below the seat
hydraulic clutch not an option
Intake Cover: its the right and left intake covers on the airbox, not the side covers
Wanted Standard Raptor Parts
Posted: |February 2nd, 2024|, 5:14 am
by keithr68
Hi Andy
Thanks for the link, sadly that ones for the 650 and it looks to be in a worse state that mine.
Wanted Standard Raptor Parts
Posted: |February 5th, 2024|, 1:58 am
by Aussiejoe