Hello All
Looking to source, the following standard parts, to fit 2002 1000 raptor, rear mudgard/undertray/numberplate holder unit, clutch leaver bracket, right and left air intake covers.
Wanted Standard Raptor Parts
-
- On the Road
- Posts: 230
- Joined: 15 years ago
- Location: Brisbane, Queensland, Australia
- Been thanked: 6 times
Wanted Standard Raptor Parts
All those pieces are made by Trend Italy but their website has been down lately.
Your options are:
Rear Mudguard/Number plate holder: Tail Tidy..do a google search, here's one I found https://www.bikefarmmv.com/en/p/kzhs017 ... ate-holder
Undertray(guessing that's a belly pan): SV1000 one should fit
Clutch Lever Bracket: Convert to a hydraulic clutch, don't need to replace clutch cables. Do a search here for info
Intake Cover: guessing they're the side covers below the seat on either side, Trend Italy for these
Carbon fibre parts are available here https://hfcarbon.de/en/cagiva/raptor/
Your options are:
Rear Mudguard/Number plate holder: Tail Tidy..do a google search, here's one I found https://www.bikefarmmv.com/en/p/kzhs017 ... ate-holder
Undertray(guessing that's a belly pan): SV1000 one should fit
Clutch Lever Bracket: Convert to a hydraulic clutch, don't need to replace clutch cables. Do a search here for info
Intake Cover: guessing they're the side covers below the seat on either side, Trend Italy for these
Carbon fibre parts are available here https://hfcarbon.de/en/cagiva/raptor/
-
- On the Road
- Posts: 599
- Joined: 9 years ago
- Location: Wiltshire
- Has thanked: 5 times
- Been thanked: 15 times
Wanted Standard Raptor Parts
Aha! I see they have carbon parts for both the side panels and underseat panels. They're not cheap mind but still cheaper than scanning & 3D printing. Has any one used these guys & can recommend them?
I'm thinking the OP may be looking for the complete rear mudguard assembly that contains the battery box etc - that may be tough to find.
I'm thinking the OP may be looking for the complete rear mudguard assembly that contains the battery box etc - that may be tough to find.
-
- On the Road
- Posts: 599
- Joined: 9 years ago
- Location: Wiltshire
- Has thanked: 5 times
- Been thanked: 15 times
-
- On the Road
- Posts: 5
- Joined: 11 months ago
- Location: North East Scotland
- Has thanked: 2 times
Wanted Standard Raptor Parts
Hi JoeAussiejoe wrote: ↑7 months ago All those pieces are made by Trend Italy but their website has been down lately.
Your options are:
Rear Mudguard/Number plate holder: Tail Tidy..do a google search, here's one I found https://www.bikefarmmv.com/en/p/kzhs017 ... ate-holder
Undertray(guessing that's a belly pan): SV1000 one should fit
Clutch Lever Bracket: Convert to a hydraulic clutch, don't need to replace clutch cables. Do a search here for info
Intake Cover: guessing they're the side covers below the seat on either side, Trend Italy for these
Carbon fibre parts are available here https://hfcarbon.de/en/cagiva/raptor/
Thanks for the advice
Tail tidy ? its the standard stuff I'm after.
Undertray(guessing that's a belly pan): its an under tray below the seat
hydraulic clutch not an option
Intake Cover: its the right and left intake covers on the airbox, not the side covers
-
- On the Road
- Posts: 5
- Joined: 11 months ago
- Location: North East Scotland
- Has thanked: 2 times
Wanted Standard Raptor Parts
Hi Andy
Thanks for the link, sadly that ones for the 650 and it looks to be in a worse state that mine.
-
- On the Road
- Posts: 230
- Joined: 15 years ago
- Location: Brisbane, Queensland, Australia
- Been thanked: 6 times
Wanted Standard Raptor Parts
Have a read of this mate, just have to spend a bit of time searching viewtopic.php?p=38109#p38109
Found this https://www.ebay.co.uk/itm/254480222484
and this https://www.ebay.co.uk/itm/385421307596 ... lgQAvD_BwE
and you'll probably have to buy a whole airbox for those intakes https://www.ebay.com/itm/192610897314
left hand intake is available new though https://www.oemmotorparts.com/en/produc ... ake-raptor
Found this https://www.ebay.co.uk/itm/254480222484
and this https://www.ebay.co.uk/itm/385421307596 ... lgQAvD_BwE
and you'll probably have to buy a whole airbox for those intakes https://www.ebay.com/itm/192610897314
left hand intake is available new though https://www.oemmotorparts.com/en/produc ... ake-raptor