v Raptor 1000 - User Mode

General spannery stuff
Post Reply
swm
On the Road
Posts: 60
Joined: 3 years ago
Has thanked: 1 time
Been thanked: 2 times

v Raptor 1000 - User Mode

Post by swm »

Hi,
I've just obtained a 2002 Cagiva V Raptor 1000. It has been off the road for 5 years so there's lots to do. Can anyone tell me how to put the bike into user/dealer mode? (pictures would be good) I've never owned one of these before.
There is an old topic covering this but the pictures seem to have been removed.
Ciao
User avatar
shebee
Site Admin
Posts: 2210
Joined: 21 years ago
Facebook address thingy: facebook.com/shebee.duff
Has thanked: 4 times
Been thanked: 8 times

Re: v Raptor 1000 - User Mode

Post by shebee »

Hi and welcome. There is a picture of the dealer mode wire loop about halfway down on the first page of this post. Hope it helps viewtopic.php?f=16&t=3333&p=22158&hilit ... des#p22152

And on the 2nd page of this one viewtopic.php?t=1046&start=15
Twisted Tequila Sister
swm
On the Road
Posts: 60
Joined: 3 years ago
Has thanked: 1 time
Been thanked: 2 times

Re: v Raptor 1000 - User Mode

Post by swm »

Hi,
Exactly what I was looking for.
Thank you
Ciao
swm
On the Road
Posts: 60
Joined: 3 years ago
Has thanked: 1 time
Been thanked: 2 times

Re: v Raptor 1000 - User Mode

Post by swm »

Hi,

Has anyone tried using an Opel/Vauxhall 10 Pin ODB2 converter to plug into the Cagiva 10 Pin test plug?

This looks like it was designed to do the job, but as it plugs directly into the command module I'm reluctant to just plug one into my "currently working OK" unit just to test.

This could be worth a shot if someone has an already faulty/suspect command unit. But I'm not sure of the effect on the unit should it not be compatible.

Ciao
Post Reply