Wanted: Suspension Link.
Wanted: Suspension Link.
OR Can anyone measure this for me? I did measure it twice before i cut it out but i've drawn a blank,
from the closest points of the holes and the width (Pretty sure that's 40mm with 42mm pins)
Appreciate it.
-
- On the Road
- Posts: 581
- Joined: 9 years ago
- Location: Wiltshire
- Has thanked: 3 times
- Been thanked: 13 times
Re: Wanted: Suspension Link.
Well... what with all this suspension linkage talk I couldn't help meself and did a quick grease of mine this weekend and have the measurement you need:
Yep you're correct it's 40 mm wide and 92 mm between the nearest points on the holes. And best rough measurement of 115 mm between centres - 23 mm holes then?
Andy B
Yep you're correct it's 40 mm wide and 92 mm between the nearest points on the holes. And best rough measurement of 115 mm between centres - 23 mm holes then?
Andy B
-
- On the Road
- Posts: 666
- Joined: 7 years ago
- Location: Norfolk
- Has thanked: 3 times
- Been thanked: 21 times
Re: Wanted: Suspension Link.
The needle bearings are 22mm OD...andybaggies wrote: ↑4 years ago Well... what with all this suspension linkage talk I couldn't help meself and did a quick grease of mine this weekend and have the measurement you need:
Yep you're correct it's 40 mm wide and 92 mm between the nearest points on the holes. And best rough measurement of 115 mm between centres - 23 mm holes then?
Andy B
Nick
-
- On the Road
- Posts: 228
- Joined: 14 years ago
- Location: Brisbane, Queensland, Australia
- Been thanked: 4 times
Re: Wanted: Suspension Link.
A couple of those links for sale here http://www.motopro.it/cerca?keywords=800095224