Does this look ok for my Raptor?
https://www.ebay.com.au/itm/13385041177 ... OSw6exhZn0~
If I change the vehicle from V-Raptor to Raptor it says not suitable, yet has both in the description?
New Chain Time
- Trevor68
- Web Dude
- Posts: 263
- Joined: 5 years ago
- Facebook address thingy: trevor.cannard.3
- Location: Canberra Australia
- Has thanked: 58 times
- Been thanked: 23 times
- Contact:
New Chain Time
“Motorcycling is not, of itself, dangerous. It is however, extremely unforgiving of inattention, ignorance, incompetence, or stupidity.”
Re: New Chain Time
The Raptor and V-Raptor have the same sprockets and chain, so it's ok to order one for the other and vice-versa. If I remember right it's 16T front and 40T rear. You might want to consider changing to 17/39 to match the TL1000 gearing and some say it reduces chain wear as the 17T front, being a prime number, doesn't land on the same chain link all the time.
- Trevor68
- Web Dude
- Posts: 263
- Joined: 5 years ago
- Facebook address thingy: trevor.cannard.3
- Location: Canberra Australia
- Has thanked: 58 times
- Been thanked: 23 times
- Contact:
New Chain Time
Finally moving on this, ordered 17/42 sprockets, as that is only a 1.18% gear up from stock 16/40.
Also grabbed this chain.
https://www.ebay.com.au/itm/184469365379
Also grabbed this chain.
https://www.ebay.com.au/itm/184469365379
“Motorcycling is not, of itself, dangerous. It is however, extremely unforgiving of inattention, ignorance, incompetence, or stupidity.”
- sidrat
- On the Road
- Posts: 240
- Joined: 3 years ago
- Location: Lincoln UK
- Has thanked: 27 times
- Been thanked: 17 times
New Chain Time
I thought they had geared down the raptor from the TL?
The SV 1000 is 17/40 which is a 3.6% change
I like the gearing, It makes the bike feel free and revvy, a lot like my old Ducati 748!
The SV 1000 is 17/40 which is a 3.6% change
I like the gearing, It makes the bike feel free and revvy, a lot like my old Ducati 748!
Roadsters are me!
- Trevor68
- Web Dude
- Posts: 263
- Joined: 5 years ago
- Facebook address thingy: trevor.cannard.3
- Location: Canberra Australia
- Has thanked: 58 times
- Been thanked: 23 times
- Contact:
New Chain Time
Yup, precisely why I kept it close, I think the suzuki's were 17/38. I like it the way it is.
“Motorcycling is not, of itself, dangerous. It is however, extremely unforgiving of inattention, ignorance, incompetence, or stupidity.”
New Chain Time
Also need some inputs here while still in the subject of chains.
I'm in a bit of a dilemma as to which chain & sprocket sizes would be optimal since my bike's had quite a few mods in the rear (a single-side swingarm, for one). The existing combination are 530 chains + 45 rear sprockets + 15 front sprockets. As far as upgrading the front, should I follow the standard guidelines or adapt to the rear, keeping in mind that the wheelbase has extended by roughly 19mm.
Cheers and thanks as always, mates!![Beer :beer:](./images/smilies/beer.gif)
I'm in a bit of a dilemma as to which chain & sprocket sizes would be optimal since my bike's had quite a few mods in the rear (a single-side swingarm, for one). The existing combination are 530 chains + 45 rear sprockets + 15 front sprockets. As far as upgrading the front, should I follow the standard guidelines or adapt to the rear, keeping in mind that the wheelbase has extended by roughly 19mm.
Cheers and thanks as always, mates!
![Beer :beer:](./images/smilies/beer.gif)
"Consistency is the key."
- ZNA
- ZNA