New Rear Brake Caliper

General spannery stuff
Post Reply
Al Grant
On the Road
Posts: 8
Joined: 19 years ago
Location: Black Country

New Rear Brake Caliper

Post by Al Grant »

Hi,
I have changed the rear brake caliper as 4 winters had taken their toll. The pads had worn grooves in the caliper, stopping the pads from moving freely. I have bought a new brembo caliper that is visually identical to the old one apart from there are 2 gaps on either side allowing more air into the inside of the caliper. It is working fine and I haven't had any problems so far. It is black in colour and if anyone needs one I will find out the part no.

Al
Top
User avatar
shebee
Site Admin
Posts: 2210
Joined: 21 years ago
Facebook address thingy: facebook.com/shebee.duff
Has thanked: 4 times
Been thanked: 8 times

Post by shebee »

Excellent news - part number would be good!

... any thoughts on a replacement caliper?

Thanks :D
Top
Al Grant
On the Road
Posts: 8
Joined: 19 years ago
Location: Black Country

Post by Al Grant »

The code is 20.5161.42. I boght it through QB Motorcycles who were helpful. 01384 637168.

AL
Top
User avatar
TimO
On the Road
Posts: 142
Joined: 18 years ago
Location: Hythe, Kent

Post by TimO »

I got a brembo goldline replacement from http://www.motomeccaspares.co.uk/ 01202 823453 worth giving a call as the guy there was really helpful. Part no 20.6950.51 and cost just over £75.
TimO
Top
Post Reply

Return to “General Technical”