What mods have we done

[Dazza Bing-Bong]

Morning

I don't know if this has been done before, and if it has I apologize, but we're all moification mad and it would be interesting to list all the mods we have done. My bike is the 1000.

Here's mine to date in the order that I did them;

Christie Automotive TRE
K&N filter
Motad Stainless pipes (staight through)
Powercommander II (cheers TLMonkey)
DynaPro set-up at STR Racing, Norwich ( 9BHP & 5Ftlb torque gain)
Engine crash bungs
Fork crash bungs
Tail tidy from Germany
Bikefarm Tailrisers 25mm
Renthal Superlows in grey
Motrax grips
R and G Bar ends
Pyramid Carbon Fibre front mudguard (hellishly expensive)

Next week I'm fitting EBC rear disc and pads and the Aprillia rear shock. When I can work out how to upload pictures these will follow.

Darren.

[4ph3x]

Always wanted to post this one

[993ti]

K&N filter
Airbox mod
Snorkels removed
Scorpion 'mufflers'
TRE
LED indicators
Aluminum/rubber grips
Bar end mirrors
LED taillight
PCIII USB
Tailtidy
Pazzo levers

I have a wishlist but it's quite long and i don't have money burning through my pocket
but we all have that i think, lol.

[holedigger]

renthal streetfighter bars
extended cables
barend mirrors
trak tech stubby levers
christies tre
rejigged tailtidy
relocated indicators
remus carbon cans
clutch switch replaced with moto x kill switch

in shed but not fitted yet

riflemans 1/5 insert
bikefarm triangles

[kev]

TRE
SNORKEL
K&N
PC2
RENTHELS
BREMBO RADIAL MASTER CYLINDER
R1 FORKS
RI F/BRAKE CALIPERS
R1 FRONT MUDGAURD
R&G CRASH BUNGS
REAR SETS
HONDA FIREBLADE REARSHOCK
HOMEMADE TRIANGLES
RSV SWINGARM
RSV HUGGER
SMALL INDICATORS
TAILTIDY
FRONT FLYSCREEN
REAR SINGLE SEAT HUMP JOHNSON RACE CANS

[Dazza Bing-Bong]

Oh yeah, forgot that one, thanks 993ti;

Snorkels removed.

Pics will definitely follow as stated in first post.

Darren.

[Cavia]

K&N filter
Airbox mod+gutted the stupid flappy thing inside
PAIR valve system removed+ blanked off at cilinder head
Switchable TRE
IAT sensor cheater (homemade, almost finished )
Titanium MIVV cans
Home made Suspension Triangles
Hyperpro rear shock fully adjustable
Hyperpro fork springs and home made ally preload tubes
Carbon key guard ,hugger,side panels,underseat trims
Seat cover made by Stof (thanx)
Acerbis cyclope headlight
LED Tail light and Indicators
Renthal alu street bars (to be replaced by a WRP black one)
Brembo rcs 19 radial master cilinder (best mod ever )
Goodridge s.s. brake lines
Upside down rear brake caliper (Or is it down side up so easy if you use a paddock stand!)
Home made licence plate holder
Bar end mirrors
Oh yeah, and a very nice hand made silver cagiva logo that sits on the bar clamp (gift from the missus )

[twistedpr]

Some peeps have posted mods in this thread already
http://raptors.ukbikeforum.co.uk/viewtopic.php?t=2210

Have updated my V-Rap 1000 a little since then (650ie is still the same), so here's the latest list of mods.
Hagon rear shock (now with remote damper control)
Hagon progressive fork springs
X-Tra Raptor steering damper (sodding clamp is broken though, so it's coming off )
WRP straight through cans
TRE
K&N filters
Full PCIII kit (PCIII, quickshifter, hub & lcd )
HID headlight (night vs day difference)
LED rear end (indicators and brake light)
Scottoiler
Carbon hugger
Skidmark V-Rap screen
Datatool Turnalert (leaving indicators on is my worst habit)
Bikefarm ride height triangles
X-Tra Rap seat (carbon look)
X-Tra Rap carbon number plate holder
Carbon crash bungs & normal spindle bungs

But the best performance upgrade has been losing 10kg of fat (only another 10kg to go)

In shed and on the might-get-round-to-this-one-day-or-might-sell-it list
1. Replacement body kit (tank, horns, mudguard, belly pan, headlight fairing) in assorted colours. To be taken to re-painters as soon as I've made up my mind what the hell the colour to paint - Dynorod Orange is still the leading contender
2. TLR throttle bodies (twin injectors) wiring loom, CDI & PCIII
3. RSVR Ohlins forks, steering damper, yokes, brake discs and mudguard

Wishlist
1. Carbon bits
2. RSV Rear end
3. Maybe some more carbon bits
4. Baines link (still want it higher)
5. Oh, and some lovely carbon would be nice
6. RCS 19 brake conversion

[booah]

I'm sure I'll regret this:
Carbon fibre air box= 800
Front guard=175
Chain Gang chain and sprockets =450
Bellypan=300
hugger=250
skidmarx screen=180
shift light=150
fuel pressure gauge=150
crankcase breather system=700
Nitrous wet set up =900
heater for cylinder=200
PCIII =300
multi function hub= 200
quickshifter=250
LCD display=300
Quill exhaust=1000
billet pegs=150
MPS switchgear =120
CRG clutch perch=350
CRG brake lever=149
Handlebars=75
Mirrors=149
carbon tank protector =120
Rear disc=170
pads=200
front straps=70
brake resevoir=120
clear clutch cover =215
Clutch plate and retainers =150
Barnett springs=12
rear signals=90
Protek bolts=100

[pod]

Handling

Renthal bars
Maxton fork conversion
Baines link
Hagon shock
Dymag carbon rims 3 spoke mag wheels

Brakes

Brembo radial master cylinder
rear wavy disc
Ti rear brake clevis

Engine

Hotter cams
removed the backfire device

Lightening, all fasteners, Al or Ti, carbon seat sides, one wee mirror.
Horn mount deleted, fixed to rear cylinder
Heavying,
tank cover
Bagster rack
Hugger
Seat recovered with roll mat and more foam under cover.
Givi flyscreen
Carb drain extensions
Rn G crash bungs
Scott oiler

Tarts handbag
Oberon rider pegs
Rear LED lamps
Small rear indicators
http://img7.imageshack.us/img7/43/pict1636.jpg

[Dazza Bing-Bong]

I'm sure I'll regret this:
Carbon fibre air box= 800
Front guard=175
Chain Gang chain and sprockets =450
Bellypan=300
hugger=250
skidmarx screen=180
shift light=150
fuel pressure gauge=150
crankcase breather system=700
Nitrous wet set up =900
heater for cylinder=200
PCIII =300
multi function hub= 200
quickshifter=250
LCD display=300
Quill exhaust=1000
billet pegs=150
MPS switchgear =120
CRG clutch perch=350
CRG brake lever=149
Handlebars=75
Mirrors=149
carbon tank protector =120
Rear disc=170
pads=200
front straps=70
brake resevoir=120
clear clutch cover =215
Clutch plate and retainers =150
Barnett springs=12
rear signals=90
Protek bolts=100
I'm sure I'll regret this:
Carbon fibre air box= 800
Front guard=175
Chain Gang chain and sprockets =450
Bellypan=300
hugger=250
skidmarx screen=180
shift light=150
fuel pressure gauge=150
crankcase breather system=700
Nitrous wet set up =900
heater for cylinder=200
PCIII =300
multi function hub= 200
quickshifter=250
LCD display=300
Quill exhaust=1000
billet pegs=150
MPS switchgear =120
CRG clutch perch=350
CRG brake lever=149
Handlebars=75
Mirrors=149
carbon tank protector =120
Rear disc=170
pads=200
front straps=70
brake resevoir=120
clear clutch cover =215
Clutch plate and retainers =150
Barnett springs=12
rear signals=90
Protek bolts=100

Posted: Fri May 01, 2009 2:50 pm

Booah, I've just added that up for you. 8275 Aus dollars . Is that a record on how much an individual has spent on their raptor?

Darren.

[booah]

Gee thanks Dazza

I was scared to do that myself.

[wreckah]

surprisingly short list here

when i bought the bike, i removed:
- renthal bars
- PC2
- meta alarm

mods V-raptor 1000 2002

- Braking waves front rotors
- stock shock with hyperpro spring
- hydraulic clutch conversion (TLR slave and radial brembo master cylinder from a Tuono factory)
- race airfilter (forgot which brand) plus airbox lid cutout
- high mount GPR titanium exhausts
- remapped with yosh box clone
- fuelfilter replacement outside petrol tank
- barnett springs in a brand new stock clutch
- bar end mirrors

and i did some not wanted mods too:
- bent the radiator by mistake
- made a shorty clutch lever by mistake
- scratched the tank by mistake
- lost some paintwork on the footrest hangers by mistake
- broke some frame insert lugs by mistake
- lost some engine paint by mistake
- broke oilcooler mount by mistake

[dirtydog]

Not many mods for us

Re-sprayed in passion purple (I think this is an atempt by the other half to stop me riding it)
Renthal bars
LED rear light
LED indies
coloured LEDs in the clocks
powder coated peg hangers
ART race cans

[Zane]

All these mods!!!!

I need to see some images of these bikes. I only imagine them in my mind as amazing........ get some pics on so i can take a lookin at ya bike.......