Page 1 of 1
Wanted: Suspension Link.
Posted: |October 18th, 2019|, 6:19 pm
by Craigfell
OR Can anyone measure this for me? I did measure it twice before i cut it out but i've drawn a blank,
from the closest points of the holes and the width (Pretty sure that's 40mm with 42mm pins)
Appreciate it.
Re: Wanted: Suspension Link.
Posted: |October 20th, 2019|, 4:41 am
by nickst4
I can confirm the pins/inner sleeves are 42mm long.
Nick
Re: Wanted: Suspension Link.
Posted: |October 21st, 2019|, 3:30 am
by andybaggies
Well... what with all this suspension linkage talk I couldn't help meself and did a quick grease of mine this weekend and have the measurement you need:
Yep you're correct it's 40 mm wide and 92 mm between the nearest points on the holes. And best rough measurement of 115 mm between centres - 23 mm holes then?
Andy B
Re: Wanted: Suspension Link.
Posted: |October 21st, 2019|, 5:40 pm
by Craigfell
Cheers Gents!
Re: Wanted: Suspension Link.
Posted: |October 21st, 2019|, 6:40 pm
by nickst4
andybaggies wrote: ↑4 years ago
Well... what with all this suspension linkage talk I couldn't help meself and did a quick grease of mine this weekend and have the measurement you need:
Yep you're correct it's 40 mm wide and 92 mm between the nearest points on the holes. And best rough measurement of 115 mm between centres - 23 mm holes then?
Andy B
The needle bearings are 22mm OD...
Nick
Re: Wanted: Suspension Link.
Posted: |October 31st, 2019|, 8:09 pm
by Aussiejoe
Re: Wanted: Suspension Link.
Posted: |November 2nd, 2019|, 7:34 pm
by Craigfell
Literally just seen them, £44 delivered
