Raptor Chapter

The carter was finally fixed and I started to put the raptor back together.

Most sensors, connectors and hoses are connected but I can not find the correct location to place the Air pressure sensor that is connected to the airbox. Where must this sensor be connected to the frame/engine?

It goes on the left hand side of the bike, just inside the cradle of the frame ahead of the regulator/rectifier. If you can wait until the weekend I can take a photo of mine?

Take ur time, won't have time untill next weekend anyways

It goes on the left hand side of the bike, just inside the cradle of the frame ahead of the regulator/rectifier

That's correct... conveniently placed to block access when removing/replacing the battery And strangely held by only the one (cross head) screw.

Here are the pics I promised, hope they're useful. Let me know if you need higher resolution.
Cheers, HiFi

Plus as a bonus the air pressure thingy Mr Baggies mentioned

Great thanks! this helps alot, will try to get it to fit this week. will let you know how it pans out.

One of the previous owners installed a cooling liquid expansion tank on those spots. So will just connect them somewhere most logical!!

Thanks for the help!!!

Some owners think they know better than Cagiva wonder why they changed it

Some owners think they know better than Cagiva wonder why they changed it

Especially as there was a perfectly serviceable expansion tank on the opposite side to the air pressure thingumabob - so they then had to remove the expansion tank to get at the battery