Page 1 of 1
Foot peg replacement
Posted: |February 15th, 2022|, 7:08 pm
by Boofhead
G’day everyone,
I’m lead to believe that foot pegs from some early model Ducati Monsters will fit a Raptor.
Does anyone know which year / model etc if this is true?
One of my pegs has decided to break in half with only the rubber holding it together (not much of that left these days either).
Cheers
Boofhead
Foot peg replacement
Posted: |February 15th, 2022|, 7:14 pm
by shebee
According to Dizzyblonde
…
dizzyblonde wrote: ↑9 years ago
I'm Fine RM. Been attempting to find parts, and I've had one fabulous(greatly appreciated) success, but a lot of disappointment as well.
Although....If anyone ever breaks a footpeg, they're off a Ducati monster circa 2002 part no:46410181A
Foot peg replacement
Posted: |February 19th, 2022|, 10:57 am
by Boofhead
Thanks for the info
Just a little update on the footpeg subject which may help others.
The part number has changed from 2002 Monster PN#46410181A to
2005 1000MR PN#69924171A.
That part number is for a LH & RH set, and they are quite cheap for an OEM item costing only $AU58
There are plenty of aftermarket pegs around, but none that I found are rubber coated
Cheers
Boofhead
Foot peg replacement
Posted: |February 21st, 2022|, 6:57 am
by pmogs
Foot peg replacement
Posted: |September 22nd, 2022|, 11:42 pm
by dizzyblonde
Boofhead wrote: ↑2 years ago
Thanks for the info
Just a little update on the footpeg subject which may help others.
The part number has changed from 2002 Monster PN#46410181A to
2005 1000MR PN#69924171A.
That part number is for a LH & RH set, and they are quite cheap for an OEM item costing only $AU58
There are plenty of aftermarket pegs around, but none that I found are rubber coated
Cheers
Boofhead
Good to know. At least the information Sheebs supplied led to a more common outcome!