My Cagiva Raptor 1000 had the handle bars changed by a previous owner and they are too narrow.
Does anybody know what the standard width handle bars are for a Cagiva Raptor 1000?
How wide should they be
How wide should they be
"I use to care, but things have changed"
2002 Cagiva Raptor 1000
1988 Moto Guzzi V65 Lario
2004 Redback 150cc dirt bike
2002 Cagiva Raptor 1000
1988 Moto Guzzi V65 Lario
2004 Redback 150cc dirt bike
Re: How wide should they be
The normal unfaired rappy is 72cm.
The V-rap with horns is 75cm.
Had same problem so now have both types of OEM bars
Cheers, Bfef.
The V-rap with horns is 75cm.
Had same problem so now have both types of OEM bars
Cheers, Bfef.
Re: How wide should they be
Thanks Bfef
Guess what I am shopping for this weekend
Guess what I am shopping for this weekend
"I use to care, but things have changed"
2002 Cagiva Raptor 1000
1988 Moto Guzzi V65 Lario
2004 Redback 150cc dirt bike
2002 Cagiva Raptor 1000
1988 Moto Guzzi V65 Lario
2004 Redback 150cc dirt bike
Re: How wide should they be
I'm most comfortable with enduro bars. throttle cables get little stretched, but not a problem.
Re: How wide should they be
If you've got a naked Rappy any bars will likely fit, might have to hacksaw off a couple of inches.
If you've you a V-rap be extra careful with positioning as the clutch adjuster and brake fluid reservoir catch the horns when turning.
If you need more measurements let me know!
If you've you a V-rap be extra careful with positioning as the clutch adjuster and brake fluid reservoir catch the horns when turning.
If you need more measurements let me know!