Hi All,
I'm preparing my Raptor for it's MOT after it's little accident - one issue I have though is when turning the bars from lock to lock the engine rev's a little faster one way then slow's the other way, is this just down to adjustment or will I need new cables?
Can anyone advise the best way to adjust these, if not are they the same as the SV cables?
Many Thanks
Brendan
Throttle Cable
- Brendan1983
- On the Road
- Posts: 58
- Joined: 16 years ago
- Location: Southampton, UK
- Brendan1983
- On the Road
- Posts: 58
- Joined: 16 years ago
- Location: Southampton, UK
Re: Throttle Cable
Nevermind - managed to sort it out with some more fiddling
Cagiva Raptor 650 & CBR 900 RR-W
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
Re: Throttle Cable
That's Good - all I could offer was 'yes mine does that too' passed MoT though
SnappY
~~X~X~{:>
~~X~X~{:>
- Brendan1983
- On the Road
- Posts: 58
- Joined: 16 years ago
- Location: Southampton, UK
Re: Throttle Cable
I managed to sort it by loosening off the pull cable and tightening the push cable - then just adjusting the idle screw. Lock to lock it stay's steady now
Cagiva Raptor 650 & CBR 900 RR-W