rear brakelight not working
rear brakelight not working
mot time this week and checking the rear brakelight is working on front lever but not on footbrake. if its the preasure switch are they a standard size/fit if so what size is that ? many thanks in advance have bridged the 2 pin conector from switch and brakelight came on so not wiring so guess that pesky switch will need replacing. if some-one could give me size or are they all standard
2008 fz1n, 2001 650 raptor,
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
Re: rear brakelight not working
dunno - but I have the same and will have to sort mine for upcoming MoT too
SnappY
~~X~X~{:>
~~X~X~{:>
Re: rear brakelight not working
was told system might want bleeding so will bleed tomoz. ive found some size 10x1.25 so would that be 10mm diametre and 1.25 is thread pitch or am i just a thick so and sosnapdragon wrote:dunno - but I have the same and will have to sort mine for upcoming MoT too
2008 fz1n, 2001 650 raptor,
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
Re: rear brakelight not working
I still dunnokriss wrote:-/- so would that be 10mm diametre and 1.25 is thread pitch or am i just a thick so and so
with a bit of luck someone who's clever will be along soon
SnappY
~~X~X~{:>
~~X~X~{:>
Re: rear brakelight not working
think i may have found an easier solution and that is fit a normal switch. just plugged one in and works fine. will take hanger off tomoz drill and tap and shorten the spring i have to suit and hopefully jobs done.snapdragon wrote:I still dunnokriss wrote:-/- so would that be 10mm diametre and 1.25 is thread pitch or am i just a thick so and so
with a bit of luck someone who's clever will be along soon
2008 fz1n, 2001 650 raptor,
-
- On the Road
- Posts: 170
- Joined: 14 years ago
- Location: East Riding of Yorkshire
Re: rear brakelight not working
I has a wire break off mine and replaced it with this one;
http://www.moto-racing.co.uk/item--HEL- ... witch.html
OH won the fight and fitted it the other week & MOT passed without problems
http://www.moto-racing.co.uk/item--HEL- ... witch.html
OH won the fight and fitted it the other week & MOT passed without problems
so many roads to travel - so many ways to get lost!
Re: rear brakelight not working
wicked stuff, can you remember what size you bought ? was it the 10 x1.0 or the 10 x 1.25 or othercagiva_girl wrote:I has a wire break off mine and replaced it with this one;
http://www.moto-racing.co.uk/item--HEL- ... witch.html
OH won the fight and fitted it the other week & MOT passed without problems
2008 fz1n, 2001 650 raptor,
-
- On the Road
- Posts: 170
- Joined: 14 years ago
- Location: East Riding of Yorkshire
Re: rear brakelight not working
Not sure on pitch thread - I have a brembo rear cylinder and this one was recommended by the workshop who gets the Raptor when I can't fix it.
As far as I'm aware the rear brake is the same on both 650 & 1000 - sorry probably not much help, but then I am a mere girl
I am constantly being nagged by a mate about my rear brake - usually "what do you need that for...." but hey it has more uses than the front
As far as I'm aware the rear brake is the same on both 650 & 1000 - sorry probably not much help, but then I am a mere girl
I am constantly being nagged by a mate about my rear brake - usually "what do you need that for...." but hey it has more uses than the front
so many roads to travel - so many ways to get lost!
Re: rear brakelight not working
you have been more than helpfull and have sent message to place where you got yours from so hopefully will hear today. many thanks for all your helpcagiva_girl wrote:Not sure on pitch thread - I have a brembo rear cylinder and this one was recommended by the workshop who gets the Raptor when I can't fix it.
As far as I'm aware the rear brake is the same on both 650 & 1000 - sorry probably not much help, but then I am a mere girl
I am constantly being nagged by a mate about my rear brake - usually "what do you need that for...." but hey it has more uses than the front
2008 fz1n, 2001 650 raptor,
- snapdragon
- Moderator
- Posts: 3245
- Joined: 21 years ago
- Location: Wiltshire
Re: rear brakelight not working
from another sales listing
"When using with Brembo master cylinders use '10 x 1.00mm Short' option.
-03 Copper crush washers are also required when fitting any 10 x 1mm or 10 x 1.25mm banjo bolts (x2 for single bolt, x3 for double bolt)"
"When using with Brembo master cylinders use '10 x 1.00mm Short' option.
-03 Copper crush washers are also required when fitting any 10 x 1mm or 10 x 1.25mm banjo bolts (x2 for single bolt, x3 for double bolt)"
SnappY
~~X~X~{:>
~~X~X~{:>
Re: rear brakelight not working
your so good snap, thanks very much for your helpsnapdragon wrote:from another sales listing
"When using with Brembo master cylinders use '10 x 1.00mm Short' option.
-03 Copper crush washers are also required when fitting any 10 x 1mm or 10 x 1.25mm banjo bolts (x2 for single bolt, x3 for double bolt)"
2008 fz1n, 2001 650 raptor,
-
- On the Road
- Posts: 228
- Joined: 15 years ago
- Location: Brisbane, Queensland, Australia
- Been thanked: 4 times
Re: rear brakelight not working
If you go down to your friendly nut and bolt shop they will have a pitch gauge and will be able to check it for certain. A finer thread(smaller pitch) has less chance of coming undone.
Re: rear brakelight not working
many thanks aussiejoe, with the help of a couple of very nice members on this thread have now sorted and hopefully new one arriving today. 10 x 1.00 was the reply i needed and once again very big thanks to all who helped me outAussiejoe wrote:If you go down to your friendly nut and bolt shop they will have a pitch gauge and will be able to check it for certain. A finer thread(smaller pitch) has less chance of coming undone.
2008 fz1n, 2001 650 raptor,