Plug has been replaced. In rain, the front cylinder drops out completely. Below 3000rpm the motor runs ok. Around 3000 the front cylinder drops in and out. Above 3200rpm, the motor runs very sweetly and pulls well. I don't know how to remove the coil for testing. The bike has done only 26,000klms. Is there a workshop manual on line? Also front discs pulling up unevenly but only at low speed- eg at lights. Have tried freeing up the floating studs and steel wooling the discs. No improvement.
Appreciate your help.
Mueslibob
Misfire at 3000rpm
- shebee
- Site Admin
- Posts: 2210
- Joined: 21 years ago
- Facebook address thingy: facebook.com/shebee.duff
- Has thanked: 4 times
- Been thanked: 8 times
Re: Misfire at 3000rpm
Hi,
650 or 1000?
On the in the wet problem check the front plug cap and lead iare good or just replace to be sure and that the drain hole is clear.
viewtopic.php?f=14&t=4925&hilit=Front+plug
have a look at this post and/or search for 3000 on here for some hints.
650 or 1000?
On the in the wet problem check the front plug cap and lead iare good or just replace to be sure and that the drain hole is clear.
viewtopic.php?f=14&t=4925&hilit=Front+plug
have a look at this post and/or search for 3000 on here for some hints.
Twisted Tequila Sister
- shebee
- Site Admin
- Posts: 2210
- Joined: 21 years ago
- Facebook address thingy: facebook.com/shebee.duff
- Has thanked: 4 times
- Been thanked: 8 times